From: Michael Trimarchi Subject: hub 2-0:1.0: port 2 disabled by hub (EMI?), re-enabling... Date: Fri, 20 Nov 2009 22:25:34 +0100 Message-ID: <4B07094E.8020707@panicking.kicks-ass.org> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Return-path: Received: from ms01.sssup.it ([193.205.80.99]:53535 "EHLO sssup.it" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1754365AbZKTVZd (ORCPT ); Fri, 20 Nov 2009 16:25:33 -0500 Received: from [193.205.82.7] (HELO gandalf.sssup.it) by sssup.it (CommuniGate Pro SMTP 4.1.8) with ESMTP-TLS id 55300366 for linux-omap@vger.kernel.org; Fri, 20 Nov 2009 22:05:13 +0100 Received: from [10.30.3.179] ([10.30.3.179]) by gandalf.sssup.it (8.12.10/8.12.10) with ESMTP id nAKLPYeI028292 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO) for ; Fri, 20 Nov 2009 22:25:38 +0100 Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: "linux-omap@vger.kernel.org" Hi all, I'm working on a overo board + a palo43 daughter board. I connect a camera to hit with the following result: hub 2-0:1.0: port 2 disabled by hub (EMI?), re-enabling... usb 2-2: USB disconnect, address 16 gspca: disconnect complete usb 2-2: new high speed USB device using ehci-omap and address 16 usb 2-2: New USB device found, idVendor=05a9, idProduct=a538 usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-2: Product: OV538 USB camera-013008-1 usb 2-2: Manufacturer: OmniVision Application Team usb 2-2: configuration #1 chosen from 1 choice gspca: probing 05a9:a538 ov538: sensor is ov7691 gspca: probe ok every time... This sometimes happen and simetimes in some boot is ok. But when I start some transaction I have similar problem write packet on the usb device. Can you have any idea? Michael