From: Michael Trimarchi Subject: Re: hub 2-0:1.0: port 2 disabled by hub (EMI?), re-enabling... Date: Fri, 20 Nov 2009 23:11:12 +0100 Message-ID: <4B071400.8010600@panicking.kicks-ass.org> References: <4B07094E.8020707@panicking.kicks-ass.org> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Return-path: Received: from ms01.sssup.it ([193.205.80.99]:41856 "EHLO sssup.it" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1754515AbZKTWLJ (ORCPT ); Fri, 20 Nov 2009 17:11:09 -0500 Received: from [193.205.82.7] (HELO gandalf.sssup.it) by sssup.it (CommuniGate Pro SMTP 4.1.8) with ESMTP-TLS id 55300938 for linux-omap@vger.kernel.org; Fri, 20 Nov 2009 22:50:49 +0100 Received: from [10.30.3.179] ([10.30.3.179]) by gandalf.sssup.it (8.12.10/8.12.10) with ESMTP id nAKMBDeI028591 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO) for ; Fri, 20 Nov 2009 23:11:13 +0100 In-Reply-To: <4B07094E.8020707@panicking.kicks-ass.org> Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: "linux-omap@vger.kernel.org" Michael Trimarchi wrote: > Hi all, > > I'm working on a overo board + a palo43 daughter board. I connect a > camera to hit with the following result: > > hub 2-0:1.0: port 2 disabled by hub (EMI?), > re-enabling... usb 2-2: USB disconnect, address > 16 gspca: disconnect > complete usb 2-2: new high speed USB device using ehci-omap and address > 16 usb 2-2: New USB device found, idVendor=05a9, > idProduct=a538 usb 2-2: New USB device strings: > Mfr=1, Product=2, SerialNumber=0 usb 2-2: Product: OV538 > USB camera-013008-1 usb 2-2: > Manufacturer: OmniVision Application Team > usb 2-2: configuration #1 chosen from 1 > choice gspca: probing > 05a9:a538 ov538: > sensor is ov7691 > gspca: probe ok > every time... > This sometimes happen and simetimes in some boot is ok. But when I start > some transaction > I have similar problem write packet on the usb device. Can you have any > idea? Ok I use isoc transfer to the sensor and I use a 2.6.29 kernel openembedded tree. # CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=y CONFIG_OMAP_EHCI_PHY_MODE=y # CONFIG_OMAP_EHCI_TLL_MODE is not set CONFIG_USB_EHCI_ROOT_HUB_TT=y Is there a part of the support patched where I can check? Michael > > Michael > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html >