Return-path: Received: from viefep19-int.chello.at ([62.179.121.39]:28307 "EHLO viefep19-int.chello.at" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756804AbZLFMwT (ORCPT ); Sun, 6 Dec 2009 07:52:19 -0500 Message-ID: <4B1BA901.3080703@waechter.wiz.at> Date: Sun, 06 Dec 2009 13:52:17 +0100 From: =?UTF-8?B?TWF0dGhpYXMgV8OkY2h0ZXI=?= MIME-Version: 1.0 To: Manu Abraham CC: linux-media@vger.kernel.org Subject: Re: Mantis =?UTF-8?B?4oCTIGFueW9uZT8=?= References: <4B0E6CC0.9030207@waechter.wiz.at> <1a297b360912042154q619caa3dkf3818793f46c2c50@mail.gmail.com> In-Reply-To: <1a297b360912042154q619caa3dkf3818793f46c2c50@mail.gmail.com> Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Sender: linux-media-owner@vger.kernel.org List-ID: Manu, Thanks for taking care. > Please try http://jusst.de/hg/v4l-dvb > and report the issues It looks as if dependencies and frontends are not in line. • dependencies for my card’s relevant frontends STB0899, STB6100, and LNBP21 are missing from Kconfig, • dependency for CU1216 is in, but frontend driver source missing. It’s neither in my kernel 2.6.32 sources nor in linuxtv’s v4l-dvb. So, mantis_core is automatically selected and compiled, hopper too, but not mantis. Worked around it by adding/replacing the dependencies (in fact, removing the dependency for CU1216 should have enabled build of mantis). Remaining issues for me: • Can’t lock to 19.2/11303h (looks like something new, related to the change of the transponder’s feed, but other cards – e.g. TBS 6920 and Tevii 470 – do sync without a problem). Looks like a frontend issue to me (STB0899/STB6100), as mantis and budget-ci cards are affected in the same way. This correlates with perfect and quick lock of 19.2/11362h which is about the same frequency and has the same DVB parameters (22000/hC23M5O35S1). • Sometimes very slow lock at transponder change, slow enough to trace it in femon. femon first shows high BER rates and the picture is blocky, reducing within 3 or 4 Seconds to BER=0 and perfect picture. I should be able to repeat that and give you some logs if you need it. • Sometimes lock to a transponder only in certain order of previous transponder. Hard to formalize, though. Verbose module output shows 1 to 2 unsuccessful locking attempts per second by the driver. • Still no 0x0000-0xffff SNR and STR range. • Currently no lock on 19.2/12693h either, but this may be a signal quality issue on my side. • Have not yet tried it with two mantis cards in a system, but there was a problem at least with ci handling in such a setup using s2-liplianin for a friend of mine. Will test that next week. • Have not tried IR (I use a radio RCU with lirc). – Matthias