From: jeff@garzik.org (Jeff Garzik) Date: Mon, 14 Dec 2009 17:06:34 -0500 Subject: [PATCH] add PATA host controller support for Cirrus Logic's EP93xx CPUs In-Reply-To: <4B26B0D6.4080809@bluewatersys.com> References: <200911261651.40928.bzolnier@gmail.com> <4B15BAA1.2010408@bluewatersys.com> <200912020206.59659.bzolnier@gmail.com> <4B26B0D6.4080809@bluewatersys.com> Message-ID: <4B26B6EA.8050403@garzik.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 12/14/2009 04:40 PM, Ryan Mallon wrote: > I have added some of my own debugging. The problem appears to be that > __pata_ep93xx_write gets called from probe (via ata_host_activate), but > ap->private_data (ata_timing) is still null. The timing private_data is > set by pata_ep93xx_set_piomode, but that needs adev->pio_mode set, but I > don't know where this happens. I assume the ATA core handles this. Do I > need to call pata_ep93xx_set_piomode from pata_ep93xx_probe before > ata_host_activate, or should the private_data timing be set to some > default in the probe? ap->private_data is traditionally initialized in the ->port_start() hook. Likely, you should follow other drivers and allocate a useful data structure containing useful default values, which can then be adjusted in other hooks such as ->set_dmamode() or ->set_piomode() Jeff