From: ryan@bluewatersys.com (Ryan Mallon) Date: Mon, 11 Jan 2010 14:07:10 +1300 Subject: [PATCH] ep93xx: use pr_fmt in dma-m2p.c In-Reply-To: References: Message-ID: <4B4A79BE.6080302@bluewatersys.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org H Hartley Sweeten wrote: > Use pr_fmt to prefix kernel output with the module name. > > Signed-off-by: H Hartley Sweeten > Cc: Ryan Mallon > > --- > > diff --git a/arch/arm/mach-ep93xx/dma-m2p.c b/arch/arm/mach-ep93xx/dma-m2p.c > index dbcac9c..8904ca4 100644 > --- a/arch/arm/mach-ep93xx/dma-m2p.c > +++ b/arch/arm/mach-ep93xx/dma-m2p.c > @@ -28,6 +28,8 @@ > * with this implementation. > */ > > +#define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt > + > #include > #include > #include > @@ -173,7 +175,7 @@ static irqreturn_t m2p_irq(int irq, void *dev_id) > > switch (m2p_channel_state(ch)) { > case STATE_IDLE: > - pr_crit("m2p_irq: dma interrupt without a dma buffer\n"); > + pr_crit("dma interrupt without a dma buffer\n"); > BUG(); > break; > > @@ -197,7 +199,7 @@ static irqreturn_t m2p_irq(int irq, void *dev_id) > break; > > case STATE_NEXT: > - pr_crit("m2p_irq: dma interrupt while next\n"); > + pr_crit("dma interrupt while next\n"); > BUG(); > break; > } Acked-by: Ryan Mallon -- Bluewater Systems Ltd - ARM Technology Solution Centre Ryan Mallon 5 Amuri Park, 404 Barbadoes St ryan at bluewatersys.com PO Box 13 889, Christchurch 8013 http://www.bluewatersys.com New Zealand Phone: +64 3 3779127 Freecall: Australia 1800 148 751 Fax: +64 3 3779135 USA 1800 261 2934