From: jose.goncalves@inov.pt (=?ISO-8859-1?Q?Jos=E9_Miguel_Gon=E7alves?=) Date: Wed, 17 Feb 2010 18:09:35 +0000 Subject: [PATCH] spi_s3c24xx: Fix for SPI on S3C2412 Message-ID: <4B7C30DF.90805@inov.pt> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi, Testing some SPI temperature sensors and ADCs with a S3C4212 host I have found that I could not read the correct data. I've probed the SPI signals with a scope and everything seemed OK. I dig into the driver sources and on the S3C2412 datasheet to find that this device can not use the same S3C2410 driver's code because of the added FIFOs, even if not used. The following patch is needed to make the driver to work on the S3C2412 chip (and probably on the S3C2413). Regards, Jos? Miguel Gon?alves -------------- next part -------------- A non-text attachment was scrubbed... Name: linux-2.6.git-spi_s3c2412.patch Type: text/x-patch Size: 2286 bytes Desc: not available URL: