Message-ID: <4BB47EFF.5020005@...1147...> Date: Thu, 01 Apr 2010 13:09:51 +0200 From: Jan Just Keijser MIME-Version: 1.0 References: <1ae7a5fdae1e6d71bb7708a4f75ff060e3237c1c.1270060247.git.fabian.knittel@...1338...> <20100331231158.2782.qmail@...1287...> <4BB45497.8040707@...1338...> <4BB46059.9080208@...1147...> <20100401091414.24106.qmail@...1287...> In-Reply-To: <20100401091414.24106.qmail@...1287...> Subject: Re: [Openvpn-devel] [PATCH 4/9] vlan: Prepend and remove VLAN identifiers on outgoing and incoming frames List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit To: openvpn-devel@lists.sourceforge.net Peter Stuge wrote: > Jan Just Keijser wrote: > >> FYI: 802.1Q defines VLAN 1 as the 'native' LAN: all packets on VLAN 1 >> are *by definition* not encapsulated (according to my CCNA guide ;-)) >> > > 802.1Q != CCNA.. > > Look at the spec, Table 9-2 on page 86. (100 in PDF) > > VID Use > 0 "no VLAN identifier is present in the frame" > 1 "The default PVID value used for classifying frames on ingress .. > The PVID value of a Port can be changed by management." > FFF "Reserved for implementation use." > > > be careful here (from table 9.2; I actually have an older copy of the 802.1Q spec): The null VLAN ID. Indicates that the tag header contains only priority information; no VLAN identifier is present in the frame. This VID value shall not be configured as a PVID or a member of a VID Set, or configured in any Filtering Database entry, or used in any Management operation. so it *does* have priority info in it and it is *not* the same as no VLAN identifier ... cheers, JJK