From: Rogan Dawes <rogan@dawes.za.net>
Date: Tue, 20 Jul 2010 13:01:40 +0200
Subject: [U-Boot] Non standard CFI detection tweaks
In-Reply-To: <4C458041.3080901@emk-elektronik.de>
References: <4C3CC5E5.1040606@dawes.za.net>	<201007191533.37947.sr@denx.de>	<4C446314.7040702@dawes.za.net>	<201007200958.33622.sr@denx.de>	<4C456073.3000706@dawes.za.net>	<4C4573BF.40405@dawes.za.net>
	<4C457900.2020200@emk-elektronik.de>
	<4C457A9C.4020403@dawes.za.net>
	<4C458041.3080901@emk-elektronik.de>
Message-ID: <4C458214.5060709@dawes.za.net>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On 2010/07/20 12:53 PM, Reinhard Meyer (-VC) wrote:
> Rogan Dawes schrieb:
>> You're not tempted to try to fix the CFI driver for your board anyway, I
>> suppose? :-)
>
> Tempted: YES !
>
> Time available: (currently) NONE
>
> Being on the wish/todo list: since years :)
>
> (and I might have to add some board specifig #ifdefs because of the
> 16 MB mapping)
>
> BTW.. are you sure the CFI driver cannot handle such a simple flash?
> It might need just the proper #defines.
> After all, the Spansion 8/16-bit wide flashs are not uncommon,
> neither should it be uncommon to connect them in 8-bit mode.
>
> Reinhard

Hi Reinhard,

Of course I understand that everyone's time is limited, and my 
priorities are not everyone else's.

If you can point me to the correct defines, I'd be happy to try them. 
Unfortunately, I have no real clue what I am doing :-)

Regards,

Rogan