From: ben@simtec.co.uk (Ben Dooks) Date: Wed, 28 Jul 2010 19:13:59 +0100 Subject: [PATCH 3/5] ARM: S5P6440: Add RTC support for S5P6440 In-Reply-To: <1279702814-14929-4-git-send-email-kgene.kim@samsung.com> References: <1279702814-14929-1-git-send-email-kgene.kim@samsung.com> <1279702814-14929-4-git-send-email-kgene.kim@samsung.com> Message-ID: <4C507367.1000206@simtec.co.uk> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 21/07/10 10:00, Kukjin Kim wrote: > From: Atul Dahiya > > This patch adds support RTC driver for Samsung S5P6440. > > Signed-off-by: Atul Dahiya > Signed-off-by: Kukjin Kim > --- > arch/arm/mach-s5p6440/Kconfig | 2 ++ > arch/arm/mach-s5p6440/include/mach/map.h | 2 +- > arch/arm/mach-s5p6440/mach-smdk6440.c | 1 + > 3 files changed, 4 insertions(+), 1 deletions(-) > > diff --git a/arch/arm/mach-s5p6440/Kconfig b/arch/arm/mach-s5p6440/Kconfig > index f066fae..b2d4716 100644 > --- a/arch/arm/mach-s5p6440/Kconfig > +++ b/arch/arm/mach-s5p6440/Kconfig > @@ -18,7 +18,9 @@ config MACH_SMDK6440 > select CPU_S5P6440 > select SAMSUNG_DEV_TS > select SAMSUNG_DEV_ADC > + select S3C_DEV_RTC > select S3C_DEV_WDT > + select HAVE_S3C_RTC > select HAVE_S3C2410_WATCHDOG > help > Machine support for the Samsung SMDK6440 I'm considering we shoudl just set HAVE_S3C_RTC for each SOC, as allowing it to compile isn't going to end up causing a problem. Adding it to each machine will end up with large Kconfig entries for each. -- Ben