From: Reinhard Meyer (-VC) <reinhard.meyer@emk-elektronik.de>
Date: Fri, 06 Aug 2010 17:30:53 +0200
Subject: [U-Boot] Warning NetReceive(): Make sure packet buffers start
 on an even address
In-Reply-To: <1281105534.15517.99.camel@cpilinux.cdsrail.com>
References: <4C5BE2CF.2020306@emk-elektronik.de>	
	<20100806103134.2048B1524E4@gemini.denx.de>	
	<4C5BE642.4020706@emk-elektronik.de>
	<1281105534.15517.99.camel@cpilinux.cdsrail.com>
Message-ID: <4C5C2AAD.5000702@emk-elektronik.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Chris Isbell schrieb:
> Or are you aware of any need to hand over broadcast packets into
> NetReceive() ?
> 
> I am stepping into the middle of this, so the following may be totally
> misguided...
> 
> BOOTP/DHCP servers can send broadcast packets. I have just tried this
> with a Windows DHCP server the the DHCP response was broadcast.

Thanks for the info!

That sounds like typical Windows (%&@#*)....

Duly noted, broadcast reception is configurable by #define now.

Best Regards
Reinhard