From: Brice Goglin Subject: Dell Latitude E6410 Ricoh e822 not working with 2.6.36-rc Date: Mon, 20 Sep 2010 14:40:21 +0200 Message-ID: <4C975635.5090108@ens-lyon.org> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Return-path: Received: from iona.labri.fr ([147.210.8.143]:53697 "EHLO iona.labri.fr" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753728Ab0ITNCj (ORCPT ); Mon, 20 Sep 2010 09:02:39 -0400 Received: from localhost (localhost.localdomain [127.0.0.1]) by iona.labri.fr (Postfix) with ESMTP id E715536B99 for ; Mon, 20 Sep 2010 14:40:25 +0200 (CEST) Received: from iona.labri.fr ([127.0.0.1]) by localhost (iona.labri.fr [127.0.0.1]) (amavisd-new, port 10027) with LMTP id XmKxdeMjOKFb for ; Mon, 20 Sep 2010 14:40:25 +0200 (CEST) Received: from [193.50.110.244] (unknown [193.50.110.244]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (Client did not present a certificate) by iona.labri.fr (Postfix) with ESMTP id CECEA36B93 for ; Mon, 20 Sep 2010 14:40:25 +0200 (CEST) Sender: linux-mmc-owner@vger.kernel.org List-Id: linux-mmc@vger.kernel.org To: linux-mmc@vger.kernel.org Hello, I have a Dell Latitude E6410 laptop with the following Ricoh reader: 03:00.0 SD Host controller: Ricoh Co Ltd Device e822 (rev 03) (prog-if 01) Subsystem: Dell Device 040a Flags: bus master, fast devsel, latency 0, IRQ 19 Memory at f2c40000 (32-bit, non-prefetchable) [size=256] Capabilities: Kernel driver in use: sdhci-pci The driver has been failing with ugly errors for a long time and I was following [1] (pointed out from [2]) to get proper support. According to [2], 2.6.36 is supposed to contain what's needed to support my reader, but 2.6.36-rc3 still fails to read my SD card. It just says mmc0: new high speed SD card at address b368 And nothing else happens. dmesg with mmc debug enabled is available at https://bugzilla.redhat.com/attachment.cgi?id=447442 For the record, the same SD card works fine on a Dell Latitude E6500 (older model) with Ubuntu 10.4 03:01.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 21) I was told to report the upstream here, so here I am. Brice [1] https://bugzilla.redhat.com/show_bug.cgi?id=596475 [2] https://bugzilla.kernel.org/show_bug.cgi?id=16390