From: Reinhard Meyer Date: Tue, 05 Oct 2010 09:05:43 +0200 Subject: [U-Boot] [RFC] [PATCH V2] arm: arm926ejs: use ELF relocations In-Reply-To: <20101005064516.AEA4C153A7E@gemini.denx.de> References: <1286260287-1571-1-git-send-email-albert.aribaud@free.fr> <20101005064516.AEA4C153A7E@gemini.denx.de> Message-ID: <4CAACE47.5090105@emk-elektronik.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Wolfgang Denk, dear Albert Aribaud, Initial Test reports: File Size with Heiko's patch: 244k U-Boot works. File size with Albert's V2 patch: 255k U-Boot stops at: U-Boot 2010.09-00113-g3c5eeb8-dirty (Oct 05 2010 - 10:04:25) CPU: AT91SAM9XE Crystal frequency: 18.432 MHz CPU clock : 198.656 MHz Master clock : 99.328 MHz I2C: ready DRAM: 64 MiB File size with Wolfgang's patch: 244k (strange!) U-Boot stops at: U-Boot 2010.09-00114-g1b05d80 (Oct 05 2010 - 10:14:32) CPU: AT91SAM9XE Crystal frequency: 18.432 MHz CPU clock : 198.656 MHz Master clock : 99.328 MHz I2C: ready DRAM: 64 MiB FLASH: 512 KiB NAND: 256 MiB I only added #define CONFIG_RELOC_FIXUP_WORKS to my board config (compared to the Heiko-version). Did I miss to change anything else. I find it strange that the file size shrinks back to the Heiko version size when Wolfgang's patch variant is used. Later I might have more time to investigate. Best Regards, Reinhard