From: Reinhard Meyer Date: Tue, 05 Oct 2010 09:23:01 +0200 Subject: [U-Boot] [RFC] [PATCH V2] arm: arm926ejs: use ELF relocations In-Reply-To: <4CAACE47.5090105@emk-elektronik.de> References: <1286260287-1571-1-git-send-email-albert.aribaud@free.fr> <20101005064516.AEA4C153A7E@gemini.denx.de> <4CAACE47.5090105@emk-elektronik.de> Message-ID: <4CAAD255.1080501@emk-elektronik.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Wolfgang Denk, dear Albert Aribaud, > > Initial Test reports: > > File Size with Heiko's patch: 244k > U-Boot works. > > File size with Albert's V2 patch: 255k > U-Boot stops at: > U-Boot 2010.09-00113-g3c5eeb8-dirty (Oct 05 2010 - 10:04:25) > > CPU: AT91SAM9XE > Crystal frequency: 18.432 MHz > CPU clock : 198.656 MHz > Master clock : 99.328 MHz > I2C: ready > DRAM: 64 MiB > > > File size with Wolfgang's patch: 244k (strange!) Sorry, I did not look close enough to see that Wolfgang's Patch does not add anything for ARM926! Remains the fact that Albert's V2 dies after printing the DRAM - that is probably during relocation :) > I only added #define CONFIG_RELOC_FIXUP_WORKS to my board config > (compared to the Heiko-version). > Did I miss to change anything else. Best Regards, Reinhard