From: Jens Scharsig Date: Wed, 20 Oct 2010 12:51:20 +0200 Subject: [U-Boot] [Patch V2] update board EB+CPUx9K2 In-Reply-To: <5C5E2537-7A0C-4A7F-8C1B-A9E3965BD9DA@googlemail.com> References: <4CBB1517.8000703@scharsoft.de> <4CBDD74B.8030003@scharsoft.de> <4CBDE3B7.6020403@emk-elektronik.de> <5C5E2537-7A0C-4A7F-8C1B-A9E3965BD9DA@googlemail.com> Message-ID: <4CBEC9A8.6000108@bus-elektronik.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Am 2010-10-20 08:48, schrieb Andreas Bie?mann: > Dear Reinhard Meyer, > > Am 19.10.2010 um 20:30 schrieb Reinhard Meyer: >>> +#define CONFIG_SYS_TEXT_BASE 0x00000000 >> How does this work with a text base of 0? Am I missing something? > > This should work when booting from NOR. The first MiB (0x00000000-0x00100000) is mapped to internal SRAM, internal ROM _or_ NOR on CS0 depending on 'BMS' Pin and REMAP command -> datasheet at91rm9200 p17. Nevertheless I would prefer to explicitly address NOR flash on CS0 with 0x10000000. > This is right. The board boot from a 16-bit NOR Flash. regards Jens Scharsig