From: nm@ti.com (Nishanth Menon) Date: Tue, 08 Mar 2011 07:33:16 +0530 Subject: [PATCH V2 1/3] OMAP4: Enable 800 MHz and 1 GHz MPU-OPP In-Reply-To: <1299318681-21348-1-git-send-email-shweta.gulati@ti.com> References: <1299318681-21348-1-git-send-email-shweta.gulati@ti.com> Message-ID: <4D758E64.8010400@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Shweta Gulati wrote, on 03/05/2011 03:21 PM: > Almost all OMAP4 boards support OPP 800 MHz and OPP 1 GHz. > Enable them in OPP Table. For small minority of boards which use > OMAP4430-800 MHz device OPP 1GHz is not supported, > OPP 1GHz should be disabled from board file. > > Signed-off-by: Shweta Gulati > Cc: linux-arm-kernel at lists.infradead.org > --- > arch/arm/mach-omap2/opp4xxx_data.c | 4 ++-- > 1 files changed, 2 insertions(+), 2 deletions(-) > > diff --git a/arch/arm/mach-omap2/opp4xxx_data.c b/arch/arm/mach-omap2/opp4xxx_data.c > index 57f1498..93b9744 100644 > --- a/arch/arm/mach-omap2/opp4xxx_data.c > +++ b/arch/arm/mach-omap2/opp4xxx_data.c > @@ -71,9 +71,9 @@ static struct omap_opp_def __initdata omap44xx_opp_def_list[] = { > /* MPU OPP2 - OPP100 */ > OPP_INITIALIZER("mpu", true, 600000000, OMAP4430_VDD_MPU_OPP100_UV), > /* MPU OPP3 - OPP-Turbo */ > - OPP_INITIALIZER("mpu", false, 800000000, OMAP4430_VDD_MPU_OPPTURBO_UV), > + OPP_INITIALIZER("mpu", true, 800000000, OMAP4430_VDD_MPU_OPPTURBO_UV), > /* MPU OPP4 - OPP-SB */ > - OPP_INITIALIZER("mpu", false, 1008000000, OMAP4430_VDD_MPU_OPPNITRO_UV), > + OPP_INITIALIZER("mpu", true, 1008000000, OMAP4430_VDD_MPU_OPPNITRO_UV), > /* L3 OPP1 - OPP50 */ > OPP_INITIALIZER("l3_main_1", true, 100000000, OMAP4430_VDD_CORE_OPP50_UV), > /* L3 OPP2 - OPP100, OPP-Turbo, OPP-SB */ Acked-by: Nishanth Menon -- Regards, Nishanth Menon