Return-Path: Received: from mga09.intel.com (mga09.intel.com [134.134.136.24]) by mx1.pokylinux.org (Postfix) with ESMTP id 7FFCB4C800BA for ; Mon, 21 Mar 2011 14:45:56 -0500 (CDT) Received: from orsmga001.jf.intel.com ([10.7.209.18]) by orsmga102.jf.intel.com with ESMTP; 21 Mar 2011 12:45:56 -0700 X-ExtLoop1: 1 X-IronPort-AV: E=Sophos;i="4.63,220,1299484800"; d="scan'208";a="722553855" Received: from doubt.jf.intel.com (HELO [10.7.199.86]) ([10.7.199.86]) by orsmga001.jf.intel.com with ESMTP; 21 Mar 2011 12:45:55 -0700 Message-ID: <4D87AAF2.3010108@linux.intel.com> Date: Mon, 21 Mar 2011 12:45:54 -0700 From: Darren Hart User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.2.14) Gecko/20110223 Lightning/1.0b2 Thunderbird/3.1.8 MIME-Version: 1.0 To: Gary Thomas References: <4D876DD3.5070106@mlbassoc.com> <1300722848.30423.3751.camel@rex> <4D877E6B.9000007@mlbassoc.com> <1300730269.30423.3975.camel@rex> <4D879883.5010501@linux.intel.com> <4D879A14.7040104@mlbassoc.com> In-Reply-To: <4D879A14.7040104@mlbassoc.com> Cc: Poky Subject: Re: Using RPM with Poky X-BeenThere: poky@yoctoproject.org X-Mailman-Version: 2.1.13 Precedence: list List-Id: Poky build system developer discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 21 Mar 2011 19:45:56 -0000 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit On 03/21/2011 11:33 AM, Gary Thomas wrote: > On 03/21/2011 12:27 PM, Darren Hart wrote: >> >> >> On 03/21/2011 10:57 AM, Richard Purdie wrote: >>> On Mon, 2011-03-21 at 10:35 -0600, Gary Thomas wrote: >>>> On 03/21/2011 09:54 AM, Richard Purdie wrote: >>>>> On Mon, 2011-03-21 at 09:25 -0600, Gary Thomas wrote: >>>>>> I'm trying to do some testing with Poky on an atom-PC. I thought >>>>>> I'd try with a minimal system and then add pieces I need. Sadly, >>>>>> I've run aground doing this. I've built a couple of images with >>>>>> varying results: >>>>>> poky-image-minimal-live - boots on my box >>>>>> poky-image-sato-live - boots, but fails to find X display, then >>>>>> hangs (*) >>>>>> >>>>>> There seem to be no RPM tools on the minimal image. Did I miss >>>>>> something? >>>>>> On my old, ipk based system, I'd build up a minimal image then use >>>>>> opkg >>>>>> to install additional packages. >>>>> >>>>> Minimal images were never meant to ship with the package manager >>>>> and now >>>>> don't. You can obviously change the image definitions easily enough as >>>>> needed. >>>>> >>>>>> How do I do that with the RPM based images? >>>>> >>>>> The same switch turns on/off the package manager data for rpm and >>>>> opkg. >>>> >>>> I tried adding this to local.conf, but nothing changed when I build >>>> minimal image: >>>> IMAGE_FEATURES += " package-management ssh-server-dropbear " >>> >>> There is also this: >>> >>> # remove not needed ipkg informations >>> ROOTFS_POSTPROCESS_COMMAND += "remove_packaging_data_files ; " >>> >>> in poky-image-minimal.bbclass which has been there for a long time and >>> removes the package manager data files. >>> >>> >>>> BTW, where is this documented? Not in the Poky handbook from what I >>>> can tell. >>>> >>>> Also, is there documentation on how to use zypper, how to set up >>>> repositories, etc? >>> >>> I think others have helped here. Please do send patches for the manual >>> when people go to the trouble of finding information to help though! >>> >>>>>> I've checked the documentation and there's basically nothing >>>>>> about this, unless I looked in the wrong place. >>>>>> >>>>>> Any ideas or pointers gladly accepted. Thanks >>>>>> >>>>>> (*) I had success with this in the past when I booted with >>>>>> MACHINE=emenlow >>>>>> but that hardware isn't in the primary list. >>>>> >>>>> I'm not sure why this isn't working or what the problem might be... >>>> >>>> It complains it can't find /dev/fb0. See the boot log at >>>> http://www.mlbassoc.com/poky/boot_2011-03-21.log >>> >>> Does your board have Intel graphics or PVR/SGX? emenlow has PVR/SGX >>> which might explain this... >> >> And if you need emenlow, that bsp is now part of the meta-intel layer: >> >> http://git.pokylinux.org/cgit.cgi/meta-intel/ > > Do you have instructions/suggestions on how to add this to my extant > Poky tree? > It's just another layer, so you checkout it out somewhere and add the meta-intel/meta-$MACHINE directory to your conf/bblayer.conf file. -- Darren Hart Intel Open Source Technology Center Yocto Project - Linux Kernel