Return-Path: Received: from mga09.intel.com (mga09.intel.com [134.134.136.24]) by mx1.pokylinux.org (Postfix) with ESMTP id 7118E4C80050 for ; Mon, 21 Mar 2011 18:24:56 -0500 (CDT) Received: from orsmga001.jf.intel.com ([10.7.209.18]) by orsmga102.jf.intel.com with ESMTP; 21 Mar 2011 16:24:56 -0700 X-ExtLoop1: 1 X-IronPort-AV: E=Sophos;i="4.63,222,1299484800"; d="scan'208";a="722626548" Received: from doubt.jf.intel.com (HELO [10.7.199.86]) ([10.7.199.86]) by orsmga001.jf.intel.com with ESMTP; 21 Mar 2011 16:24:56 -0700 Message-ID: <4D87DE46.9040401@linux.intel.com> Date: Mon, 21 Mar 2011 16:24:54 -0700 From: Darren Hart User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.2.14) Gecko/20110223 Lightning/1.0b2 Thunderbird/3.1.8 MIME-Version: 1.0 To: Gary Thomas References: <4D876DD3.5070106@mlbassoc.com> <1300722848.30423.3751.camel@rex> <4D877E6B.9000007@mlbassoc.com> <1300730269.30423.3975.camel@rex> <4D879883.5010501@linux.intel.com> <4D879A14.7040104@mlbassoc.com> <4D87AAF2.3010108@linux.intel.com> <4D87B30F.90802@mlbassoc.com> <4D87B434.1070404@windriver.com> <1300741361.3049.18.camel@elmorro> <4D87D815.6090404@mlbassoc.com> In-Reply-To: <4D87D815.6090404@mlbassoc.com> Cc: Poky Subject: Re: Using RPM with Poky X-BeenThere: poky@yoctoproject.org X-Mailman-Version: 2.1.13 Precedence: list List-Id: Poky build system developer discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 21 Mar 2011 23:24:56 -0000 Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 7bit On 03/21/2011 03:58 PM, Gary Thomas wrote: > On 03/21/2011 03:02 PM, Tom Zanussi wrote: >> On Mon, 2011-03-21 at 13:25 -0700, Bruce Ashfield wrote: >>> On 11-03-21 04:20 PM, Gary Thomas wrote: >>>> On 03/21/2011 01:45 PM, Darren Hart wrote: >>>>> >>>>> >>>>> On 03/21/2011 11:33 AM, Gary Thomas wrote: >>>>>> On 03/21/2011 12:27 PM, Darren Hart wrote: >>>>>>> >>>>>>> >>>>>>> On 03/21/2011 10:57 AM, Richard Purdie wrote: >>>>>>>> On Mon, 2011-03-21 at 10:35 -0600, Gary Thomas wrote: >>>>>>>>> On 03/21/2011 09:54 AM, Richard Purdie wrote: >>>>>>>>>> On Mon, 2011-03-21 at 09:25 -0600, Gary Thomas wrote: >>>>>>>>>>> I'm trying to do some testing with Poky on an atom-PC. I thought >>>>>>>>>>> I'd try with a minimal system and then add pieces I need. Sadly, >>>>>>>>>>> I've run aground doing this. I've built a couple of images with >>>>>>>>>>> varying results: >>>>>>>>>>> poky-image-minimal-live - boots on my box >>>>>>>>>>> poky-image-sato-live - boots, but fails to find X display, then >>>>>>>>>>> hangs (*) >>>>>>>>>>> >>>>>>>>>>> There seem to be no RPM tools on the minimal image. Did I miss >>>>>>>>>>> something? >>>>>>>>>>> On my old, ipk based system, I'd build up a minimal image >>>>>>>>>>> then use >>>>>>>>>>> opkg >>>>>>>>>>> to install additional packages. >>>>>>>>>> >>>>>>>>>> Minimal images were never meant to ship with the package manager >>>>>>>>>> and now >>>>>>>>>> don't. You can obviously change the image definitions easily >>>>>>>>>> enough as >>>>>>>>>> needed. >>>>>>>>>> >>>>>>>>>>> How do I do that with the RPM based images? >>>>>>>>>> >>>>>>>>>> The same switch turns on/off the package manager data for rpm and >>>>>>>>>> opkg. >>>>>>>>> >>>>>>>>> I tried adding this to local.conf, but nothing changed when I >>>>>>>>> build >>>>>>>>> minimal image: >>>>>>>>> IMAGE_FEATURES += " package-management ssh-server-dropbear " >>>>>>>> >>>>>>>> There is also this: >>>>>>>> >>>>>>>> # remove not needed ipkg informations >>>>>>>> ROOTFS_POSTPROCESS_COMMAND += "remove_packaging_data_files ; " >>>>>>>> >>>>>>>> in poky-image-minimal.bbclass which has been there for a long >>>>>>>> time and >>>>>>>> removes the package manager data files. >>>>>>>> >>>>>>>> >>>>>>>>> BTW, where is this documented? Not in the Poky handbook from >>>>>>>>> what I >>>>>>>>> can tell. >>>>>>>>> >>>>>>>>> Also, is there documentation on how to use zypper, how to set up >>>>>>>>> repositories, etc? >>>>>>>> >>>>>>>> I think others have helped here. Please do send patches for the >>>>>>>> manual >>>>>>>> when people go to the trouble of finding information to help >>>>>>>> though! >>>>>>>> >>>>>>>>>>> I've checked the documentation and there's basically nothing >>>>>>>>>>> about this, unless I looked in the wrong place. >>>>>>>>>>> >>>>>>>>>>> Any ideas or pointers gladly accepted. Thanks >>>>>>>>>>> >>>>>>>>>>> (*) I had success with this in the past when I booted with >>>>>>>>>>> MACHINE=emenlow >>>>>>>>>>> but that hardware isn't in the primary list. >>>>>>>>>> >>>>>>>>>> I'm not sure why this isn't working or what the problem might >>>>>>>>>> be... >>>>>>>>> >>>>>>>>> It complains it can't find /dev/fb0. See the boot log at >>>>>>>>> http://www.mlbassoc.com/poky/boot_2011-03-21.log >>>>>>>> >>>>>>>> Does your board have Intel graphics or PVR/SGX? emenlow has PVR/SGX >>>>>>>> which might explain this... >>>>>>> >>>>>>> And if you need emenlow, that bsp is now part of the meta-intel >>>>>>> layer: >>>>>>> >>>>>>> http://git.pokylinux.org/cgit.cgi/meta-intel/ >>>>>> >>>>>> Do you have instructions/suggestions on how to add this to my extant >>>>>> Poky tree? >>>>>> >>>>> >>>>> It's just another layer, so you checkout it out somewhere and add the >>>>> meta-intel/meta-$MACHINE directory to your conf/bblayer.conf file. >>>> >>>> I did that, changed MACHINE=emenlow, but I got this error: >>>> >>>> | cc1: warnings being treated as errors >>>> | cc1: error: include location "/usr/local/include" is unsafe for >>>> cross-compilation >>>> | make: *** [util/scripting-engines/trace-event-perl.o] Error 1 >>>> | make: Leaving directory >>>> `/home/local/pc_test/tmp/work/emenlow-poky-linux/linux-yocto-2.6.37+git2+29047c254624e0bd8a0ac6da92862f7c6357cb0b_1+c6299ae5bece8e3a6e1bc2c236862ae004629aae-r16/linux/tools/perf' >>>> >>>> >>>> | FATAL: oe_runmake failed >>>> | ERROR: Function 'do_compile_perf' failed (see >>>> /home/local/pc_test/tmp/work/emenlow-poky-linux/linux-yocto-2.6.37+git2+29047c254624e0bd8a0ac6da92862f7c6357cb0b_1+c6299ae5bece8e3a6e1bc2c236862ae004629aae-r16/temp/log.do_compile_perf.10359 >>>> >>>> for further information) >>>> >>>> This from yesterday's master (aeaa356a5ee77b4596c479451a9db289381a4d16) >>>> >>>> I recall seeing similar errors recently, but not the solution. Is there >>>> an easy fix? >>> >>> It means that the SRCREV for the branch doesn't have the >>> following commit covered: >>> >>> ---------- >>> >>> commit 2b412826bbeb4a16abe2ea74f2456ab880c6e3c1 >>> Author: Bruce Ashfield >>> Date: Fri Feb 25 13:18:51 2011 -0500 >>> >>> perf: hard-code NO_LIBPERL/NO_LIBPYTHON >>> >>> ExtUtils::Embed ccopts is getting the host's -I/usr/local/include and >>> using it to compile perf, which results in a compilation error that >>> started appearing just recently. >>> >>> This turns the code that makes use of ExtUtils::Embed off and simply >>> hard-codes NO_LIBPERL. >>> >>> It does the same for LIBPYTHON while we're at it, since it probably >>> suffers from a similar underlying problem and just by chance hasn't >>> broken anything yet. >>> >>> This will be re-enabled after I familiarize myself with the perf >>> recipe and am able to create a proper fix. >>> >>> Signed-off-by: Tom Zanussi >>> Signed-off-by: Bruce Ashfield >>> >>> ---------- >>> >>> The kernel repo has this, and I thought that the meta-intel >>> emenlow had an updated SRCREV .. but your build error indicates >>> otherwise. >>> >> >> Hmm, strange - the SRCREV does look like it needed to be updated but yet >> I nor the autobuilder have been seeing this. >> >> Anyway, I just updated the kernel SRCREVs in master, please try again... > > It work now, thanks. It also found my display and SATA devices. Sadly, when > it's running X, I can't use the mouse. It seems to be found, but doesn't > work. > > I get these messages during boot: > usb 1-1.2: USB disconnect, address 6 > usb 1-1.2: new low speed USB device using ehci_hcd and address 7 > input: Logitech USB-PS/2 Optical Mouse as > /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.2/1-1.2:1.0/input/input4 > generic-usb 0003:046D:C03D.0005: input: USB HID v1.10 Mouse [Logitech > USB-PS/2 Optical Mouse] on usb-0000:00:1d.7-1.2/input0 > And there is a device created: > root@emenlow:~# ls -l /dev/input/ > drwxr-xr-x 2 root root 60 Mar 21 22:27 by-id > drwxr-xr-x 2 root root 60 Mar 21 22:27 by-path > crw-r----- 1 root root 13, 63 Mar 21 06:31 mice > crw-r----- 1 root root 13, 32 Mar 21 22:27 mouse0 > > Ideas? By "doesn't work" do you mean that you don't see the cursor? Or do you see the cursor, but it doesn't move? Or it moves but clicking has no effect? If "I don't see a cursor" try looking at the formfactor file and check the value of "HAVE_TOUCHSCREEN": # grep -r TOUCHSCREEN /etc/formfactor/ /etc/formfactor/config:if [ -z "$HAVE_TOUCHSCREEN" ]; then /etc/formfactor/config: HAVE_TOUCHSCREEN=0 /etc/formfactor/machconfig:HAVE_TOUCHSCREEN=0 You want that to be 0, if it's 1, then matchbox will hide the mouse. See /etc/matchbox/session > > Now, if I can just figure out how to make the [live] image larger... > (free space) > I can get on with the real testing I need to do. > Thanks for the help > -- Darren Hart Intel Open Source Technology Center Yocto Project - Linux Kernel