From: viresh.kumar@st.com (viresh kumar)
Date: Fri, 15 Apr 2011 12:15:43 +0530
Subject: dmaengine: Can we schedule new transfer from dma
	callback	routine??
In-Reply-To: <20110411085603.GA13041@n2100.arm.linux.org.uk>
References: <4DA2B3D8.6060707@st.com>
	<20110411085603.GA13041@n2100.arm.linux.org.uk>
Message-ID: <4DA7E997.3080402@st.com>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On 04/11/2011 02:26 PM, Russell King - ARM Linux wrote:
> On Mon, Apr 11, 2011 at 01:25:04PM +0530, viresh kumar wrote:
>>
>> Hello,
>>
>> In dw_dmac.c driver, dwc_descriptor_complete() routine, following is
>> mentioned before calling callback:
>>
>> 	/*
>> 	 * The API requires that no submissions are done from a
>> 	 * callback, so we don't need to drop the lock here
>> 	 */
>> 	if (callback)
>> 		callback(param);
>>
>> Does this hold true for dmaengine??
> 
> Not for slave devices - see Dan's reply:
> 
> http://lists.arm.linux.org.uk/lurker/message/20101223.005313.a38d7bf0.en.html
> 
> As the slave API hasn't been well documented, there's a lot of
> inconsistency of behaviour between DMA engine slave implementations.
> I'd suggest at least fixing slave DMA engine drivers to ensure that:
> 
> (a) the callback is always called in tasklet context
> (b) the callback can submit new slave transactions (iow, the spinlock
>     which prep_slave_sg takes must not be held during the callback.)
> 
> The way that others solve this is to move the completed txd structures
> to a local 'completed' list, and then walk this list after the spinlocks
> have been dropped.
> 

Hello,

There is one more issue in the current DW_DMAC driver.
As most of interrupt processing is done in tasklet, spin_lock_bh() is used in almost
every routine.

Now, if some driver is calling these routines from interrupt context or with interrupt
disabled, we get KERN_WARN() messages due to following in kernel/softirq.c:

static inline void _local_bh_enable_ip(unsigned long ip)
{
	WARN_ON_ONCE(in_irq() || irqs_disabled());
	...
}

Should i minimize processing in tasklets, so that spin_lock_bh is not required anymore,
as in drivers/dma/amba-pl08x.c (tasklet for every channel) or is there some other way of
doing it.

Currently, drivers/tty/serial/amba-pl011.c is calling from interrupt context or with
interrupt disabled.

-- 
viresh