Return-path: Received: from mail.kapsi.fi ([217.30.184.167]:49188 "EHLO mail.kapsi.fi" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751052Ab2AVB7x (ORCPT ); Sat, 21 Jan 2012 20:59:53 -0500 Message-ID: <4F1B6D96.8000807@iki.fi> Date: Sun, 22 Jan 2012 03:59:50 +0200 From: Antti Palosaari MIME-Version: 1.0 To: linux-media CC: Jan Hoogenraad Subject: Realtek RTL2831U Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-media-owner@vger.kernel.org List-ID: Hello I picked up again my old RTL2831U tree and upgraded to current level. It supports only RTL2831U, not RTL2832U or any other. I think I will pull-request it to the master in hope it get development effort. I have no time for it. It is working, but does not do anything extra - just show DVB-T picture. Only NEC remote. No signal statistics. No other USB IDs than Realtek reference and 14aa:0160 has my device. New USB IDs (patch or mail) are welcome. Here it is, PULL request is sent next week. http://git.linuxtv.org/anttip/media_tree.git/shortlog/refs/heads/realtek For the newer Realtek devices that same USB-bridge could be used, I named it dvb_usb_rtl28xxu. I tested it also using RTL2832U and it worked. RTL2832 demod driver I was using is stubbed test version and thus I will not release it. Feel free to write RTL2832 demod driver :-) regards Antti -- http://palosaari.fi/