From: Andre Puschmann Subject: Re: PCIe GPIO card Date: Mon, 13 Feb 2012 09:51:05 +0100 Message-ID: <4F38CEF9.70308@tu-ilmenau.de> References: Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Cc: linux-rt-users@vger.kernel.org To: linux-rt-users@vger.kernel.org Return-path: Received: from plane.gmane.org ([80.91.229.3]:34458 "EHLO plane.gmane.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751012Ab2BMIvT (ORCPT ); Mon, 13 Feb 2012 03:51:19 -0500 Received: from list by plane.gmane.org with local (Exim 4.69) (envelope-from ) id 1Rwrcx-0001OV-OP for linux-rt-users@vger.kernel.org; Mon, 13 Feb 2012 09:51:15 +0100 Received: from x23.theoinf.tu-ilmenau.de ([141.24.211.23]) by main.gmane.org with esmtp (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Mon, 13 Feb 2012 09:51:15 +0100 Received: from andre.puschmann by x23.theoinf.tu-ilmenau.de with local (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Mon, 13 Feb 2012 09:51:15 +0100 In-Reply-To: Sender: linux-rt-users-owner@vger.kernel.org List-ID: On 02/09/2012 09:15 AM, Andre Puschmann wrote: > I am looking for an interface card to connect a single pin of an > external device (output 3.3-5V) to a standard PC or notebook. There is > no parallel or serial port available on those modern PCs so I was > looking for some kind of PCI/PCIe/ExpressCard that would do the job. The > application would just poll the GPIO line. I can't believe nobody's got something like this working :-) If that's really the case I would just get myself a ExpressCard to parallel port adapter and run some (latency) tests. -Andre