From: gmbnomis@gmail.com (Simon Baatz) Date: Sun, 06 May 2012 00:49:30 +0200 Subject: mv_cesa dcache problem since 2.6.37 was: Re: mv_cesa hash functions In-Reply-To: <20120223183439.GA18545@orbit.nwl.cc> References: <20120223183439.GA18545@orbit.nwl.cc> Message-ID: <4FA5AE7A.3000201@gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi, Am 23.02.2012 19:34, schrieb Phil Sutter: > But you might suffer from another problem, which is only present on > ARM machines with VIVT cache and linux >= 2.6.37: due to commit > f8b63c1, "ARM: 6382/1: Remove superfluous flush_kernel_dcache_page()" > which prevents pages being flushed from inside the scatterlist > iterator API. This patch seems to introduce problems in other places > (namely NFS), too but I sadly did not have time to investigate this > further. I will post a possible (cryptodev-internal) solution to > cryptodev-linux-devel at gna.org, maybe this fixes the problem with > openssl. Greetings, Phil since there has been no reaction on this, I would like to bring this issue up again (I sadly don't have the expertise to investigate this further...). The issue is not limited to cryptodev, but seems to be either a problem with commit f8b63c1 or a problem in mv_cesa that was uncovered by this commit. In the past, I also had massive problems compiling on an NFS mounted file system when not reverting f8b63c1. I currently can't reproduce this anymore under 3.4-rc5. However, the following still happens on a 3.4-rc5 preempt kernel on arm kirkwood (VIVT cache): root at ww1:~# cryptsetup luksOpen /dev/sda2 c_sda2 Enter passphrase for /dev/sda2: root at ww1:~# vgchange -a y ww1_1 Volume group "ww1_1" not found root at ww1:~# vgchange -a y ww1_1 Segmentation fault Thus, the behavior of vgchange is unpredictable on a dm-crypt device when using mv_cesa (btw. the machine needs to have no load to show this behavior. I assume that the cache flushes caused by task switches make it work under load). Using the generic crypto modules, it works as expected: root at ww1:~# cryptsetup luksClose c_sda2 root at ww1:~# rmmod mv_cesa root at ww1:~# cryptsetup luksOpen /dev/sda2 c_sda2 Enter passphrase for /dev/sda2: root at ww1:~# vgchange -a y ww1_1 1 logical volume(s) in volume group "ww1_1" now active After reverting f8b63c1, it works as expected using mv_cesa as well. - Simon