From: jon-hunter@ti.com (Jon Hunter) Date: Mon, 11 Jun 2012 10:43:45 -0500 Subject: [PATCH 1/3] ARM: OMAP2+: nand: unify init functions In-Reply-To: <95b5dece2f0b06ba1242f5af4c14fe1696950101.1339419244.git.afzal@ti.com> References: <95b5dece2f0b06ba1242f5af4c14fe1696950101.1339419244.git.afzal@ti.com> Message-ID: <4FD61231.6020605@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Afzal, On 06/11/2012 09:01 AM, Afzal Mohammed wrote: > Helper function for updating nand platform data has been > added the capability to take timing structure arguement. > Usage of omap_nand_flash_init() has been replaced by modifed > one, omap_nand_flash_init was doing things similar to > board_nand_init except that NAND CS# were being acquired > based on bootloader setting. As CS# is hardwired for a given > board, acquiring gpmc CS# has been removed, and updated with > the value on board. > > NAND CS# used in beagle board was found to be CS0. > Thomas Weber reported > that value of devkit8000 to be CS0. Overo board was found > to be using CS0 based on u-boot, while google grep says > omap3touchbook too has CS0. [1] also confirms the omap3-touchbook uses CS0. > Signed-off-by: Afzal Mohammed Which boards have been tested with this change? Otherwise, looks good. Reviewed-by: Jon Hunter Cheers Jon [1] http://www.alwaysinnovating.com/wiki/index.php/Booting