From: jon-hunter@ti.com (Jon Hunter) Date: Mon, 25 Jun 2012 10:29:57 -0500 Subject: [PATCH v4 1/3] ARM: OMAP2+: nand: unify init functions In-Reply-To: References: Message-ID: <4FE883F5.6040806@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 06/22/2012 04:00 AM, Afzal Mohammed wrote: > Helper function for updating nand platform data has been > added the capability to take timing structure arguement. > Usage of omap_nand_flash_init() has been replaced by modifed > one, omap_nand_flash_init was doing things similar to > board_nand_init except that NAND CS# were being acquired > based on bootloader setting. As CS# is hardwired for a given > board, acquiring gpmc CS# has been removed, and updated with > the value on board. > > NAND CS# used in beagle board was found to be CS0. > Thomas Weber reported > that value of devkit8000 to be CS0. Overo board was found > to be using CS0 based on u-boot, while google grep says > omap3touchbook too has CS0. > > Signed-off-by: Afzal Mohammed Looks good. Reviewed-by: Jon Hunter Cheers Jon