From: monstr@monstr.eu (Michal Simek) Date: Fri, 06 Jul 2012 11:08:29 +0200 Subject: arm cortex a9, smp bootup requirement Message-ID: <4FF6AB0D.8010105@monstr.eu> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi, can someone correct me about smp boot requirement for Linux? We are fixing ARM zynq smp bootup code and would like to be sure that out bootup code is correct. I have found some requirements from standalone boot up code which is invalidate dcache, icache, branch predictor array and flush TLB. I have found in secondary_start_kernel that TLB are flushed by local_flush_tlb_all function. But haven't found any cache invalidation calling. I think it is required and we could be added to platform_secondary_init. Or is it requirement which has to be fulfil by bootloader before secondary_startup is called? We have the option to reset specific cpu in the system and cpu starts from 0x0 with cache off and in non-virtual mode where we place simple jump trampoline to the secondary_startup function. If cache invalidation is required by Linux we can extend this code to do it. Jumping trampoline is: 0x0: ldr r0, [8] 0x4: mov pc, r0 0x8: jump address Thanks, Michal -- Michal Simek, Ing. (M.Eng) w: www.monstr.eu p: +42-0-721842854 Maintainer of Linux kernel 2.6 Microblaze Linux - http://www.monstr.eu/fdt/ Microblaze U-BOOT custodian