From: Maurice Hilarius Subject: Re: I'm about ready to do SW-Raid5 - pointers needed Date: Tue, 28 Oct 2003 21:33:16 -0700 Sender: linux-raid-owner@vger.kernel.org Message-ID: <5.1.1.6.2.20031028213128.03ac8370@mail.harddata.com> References: Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Return-path: In-Reply-To: References: To: Gordon Henderson Cc: linux-raid@vger.kernel.org List-Id: linux-raid.ids With regards to your message at 12:14 PM 10/28/03, Gordon Henderson. Where you stated: >Who knows. I've just tried to swap the 2 promise cards for 2 highpoint >cards - with fairly disastrous results )-: It booted, recognised the 4 >disks (hde,g,i,k) but then started to whinge about DMA errors and general >badness, so put the promise cards back in and it's now hapilly rebuilding >the raid arrays. > >Maybe it's having 2 promise (or highpoint) cards? I had one highpoint card >in another PC for a few days and it was performing well... > >It's very annoying, whatever it is, and unfortunately I don't have the >resources or time to try to really get to the bottom of this )-: > >Gordon 3Ware. They work. Reliable Decent Open Source drivers. Decent support Fast. Do either hardware RAID ( real hardware RAID, not Promise so-called version) Make lovely 2, 4 8, or 12 port devices for MD RAID. 12 channels, 12 disks, ummm, tasty. With our best regards, Maurice W. Hilarius Telephone: 01-780-456-9771 Hard Data Ltd. FAX: 01-780-456-9772 11060 - 166 Avenue mailto:maurice@harddata.com Edmonton, AB, Canada http://www.harddata.com/ T5X 1Y3