From: grinberg@compulab.co.il (Igor Grinberg) Date: Tue, 21 Aug 2012 14:37:00 +0300 Subject: [PATCH v6 01/10] ARM: OMAP2+: nand: unify init functions In-Reply-To: <8e0958354be60d026e7e03bd179509fcbe70957b.1345524670.git.afzal@ti.com> References: <8e0958354be60d026e7e03bd179509fcbe70957b.1345524670.git.afzal@ti.com> Message-ID: <503372DC.20504@compulab.co.il> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Afzal, Thanks for the patches! On 08/21/12 13:45, Afzal Mohammed wrote: > Helper function for updating nand platform data has been > added the capability to take timing structure arguement. > Usage of omap_nand_flash_init() has been replaced by modifed > one, omap_nand_flash_init was doing things similar to > board_nand_init except that NAND CS# were being acquired > based on bootloader setting. As CS# is hardwired for a given > board, acquiring gpmc CS# has been removed, and updated with > the value on board. > > NAND CS# used in beagle board & omap3evm was found to be CS0. > Thomas Weber reported > that value of devkit8000 to be CS0. Overo board was found > to be using CS0 based on u-boot, while google grep says > omap3touchbook too has CS0. > > Signed-off-by: Afzal Mohammed > Reviewed-by: Jon Hunter Acked-by: Igor Grinberg -- Regards, Igor.