From: b-cousson@ti.com (Benoit Cousson) Date: Fri, 7 Sep 2012 10:55:18 +0200 Subject: [PATCH] ARM: dts: omap3-beagle: Add heartbeat and mmc LEDs support Message-ID: <5049B676.1080004@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Add the support for D6 and D7 LEDs on Beagle board. - D6 will be used for heartbeat - D7 will be used for mmc0 Signed-off-by: Benoit Cousson --- It is based on top of the LEDB support added by Florian. Regards, Benoit arch/arm/boot/dts/omap3-beagle.dts | 12 ++++++++++++ 1 files changed, 12 insertions(+), 0 deletions(-) diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index 3fe35c2..ca46fb2 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -24,6 +24,18 @@ label = "beagleboard::pmu_stat"; gpios = <&twl_gpio 19 0>; /* LEDB */ }; + + heartbeat { + label = "beagleboard::usr0"; + gpios = <&gpio5 22 0>; /* 150 -> D6 LED */ + linux,default-trigger = "heartbeat"; + }; + + mmc { + label = "beagleboard::usr1"; + gpios = <&gpio5 21 0>; /* 149 -> D7 LED */ + linux,default-trigger = "mmc0"; + }; }; }; -- 1.7.0.4