From: Hal Rosenstock Subject: [PATCH 7/8] opensm: Update doc for changes to torus routing for, endport support Date: Wed, 28 Nov 2012 14:03:39 -0500 Message-ID: <50B6600B.7040504@dev.mellanox.co.il> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Return-path: Sender: linux-rdma-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Alex Netes Cc: "linux-rdma (linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org)" , Jim Schutt List-Id: linux-rdma@vger.kernel.org Change CA links to endport links Signed-off-by: Hal Rosenstock --- doc/current-routing.txt | 19 ++++++++++--------- man/torus-2QoS.8.in | 19 ++++++++++--------- 2 files changed, 20 insertions(+), 18 deletions(-) diff --git a/doc/current-routing.txt b/doc/current-routing.txt index c984801..dcd64a7 100644 --- a/doc/current-routing.txt +++ b/doc/current-routing.txt @@ -748,21 +748,22 @@ will be ignored, and a warning will be generated. For inter-switch links, Torus-2QoS uses VL values 0-3 to implement one of its supported QoS levels, and VL values 4-7 to implement the other. For -CA links, Torus-2QoS uses VL value 0 for one of its supported QoS -levels and VL value 1 to implement the other. Hard-to-diagnose application -issues may arise if traffic is not delivered fairly across each of these -two VL ranges. For inter-switch links, Torus-2QoS will detect and warn if -VL arbitration is configured unfairly across VLs in the range 0-3, and also -in the range 4-7. Note that the default OpenSM VL arbitration configuration -does not meet this constraint, so all torus-2QoS users should configure VL +endport links (CA, router, switch management port), Torus-2QoS uses VL +value 0 for one of its supported QoS levels and VL value 1 to implement +the other. Hard-to-diagnose application issues may arise if traffic is +not delivered fairly across each of these two VL ranges. For +inter-switch links, Torus-2QoS will detect and warn if VL arbitration is +configured unfairly across VLs in the range 0-3, and also in the range +4-7. Note that the default OpenSM VL arbitration configuration does +not meet this constraint, so all torus-2QoS users should configure VL arbitration via qos_ca_vlarb_high, qos_swe_vlarb_high, qos_ca_vlarb_low, qos_swe_vlarb_low, etc. Note that torus-2QoS maps SL values to VL values differently -for inter-switch and CA links. This is why qos_vlarb_high and +for inter-switch and endport links. This is why qos_vlarb_high and qos_vlarb_low should not be used, as using them may result in VL arbitration for a QoS level being different across inter-switch -links vs. across CA links. +links vs. across endport links. Operational Considerations: diff --git a/man/torus-2QoS.8.in b/man/torus-2QoS.8.in index d62beba..f192066 100644 --- a/man/torus-2QoS.8.in +++ b/man/torus-2QoS.8.in @@ -406,21 +406,22 @@ torus-2QoS, any configuration via qos_sl2vl, qos_swe_sl2vl, .P For inter-switch links, Torus-2QoS uses VL values 0-3 to implement one of its supported QoS levels, and VL values 4-7 to implement the other. For -CA links, Torus-2QoS uses VL value 0 for one of its supported QoS -levels and VL value 1 to implement the other. Hard-to-diagnose application -issues may arise if traffic is not delivered fairly across each of these -two VL ranges. For inter-switch links, Torus-2QoS will detect and warn if -VL arbitration is configured unfairly across VLs in the range 0-3, and also -in the range 4-7. Note that the default OpenSM VL arbitration configuration -does not meet this constraint, so all torus-2QoS users should configure VL +endport links (CA, router, switch management port), Torus-2QoS uses VL +value 0 for one of its supported QoS levels and VL value 1 to implement +the other. Hard-to-diagnose application issues may arise if traffic is +not delivered fairly across each of these two VL ranges. For +inter-switch links, Torus-2QoS will detect and warn if VL arbitration is +configured unfairly across VLs in the range 0-3, and also in the range +4-7. Note that the default OpenSM VL arbitration configuration does +not meet this constraint, so all torus-2QoS users should configure VL arbitration via qos_ca_vlarb_high, qos_swe_vlarb_high, qos_ca_vlarb_low, qos_swe_vlarb_low, \fIetc.\fR .P Note that torus-2QoS maps SL values to VL values differently -for inter-switch and CA links. This is why qos_vlarb_high and +for inter-switch and endport links. This is why qos_vlarb_high and qos_vlarb_low should not be used, as using them may result in VL arbitration for a QoS level being different across inter-switch -links vs. across CA links. +links vs. across endport links. . .SH OPERATIONAL CONSIDERATIONS . -- 1.7.8.2 -- To unsubscribe from this list: send the line "unsubscribe linux-rdma" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html