From: nicolas.ferre@atmel.com (Nicolas Ferre) Date: Thu, 20 Dec 2012 18:51:15 +0100 Subject: at91sam9260 MACB problem with IP fragmentation In-Reply-To: <50D2D7BD.3030801@erwinrol.com> References: <50C08233.9030905@erwinrol.com> <50C09D2E.8050608@atmel.com> <50D2D7BD.3030801@erwinrol.com> Message-ID: <50D35013.9020106@atmel.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 12/20/2012 10:17 AM, Erwin Rol : > Hallo Nicolas, > > On 6-12-2012 14:27, Nicolas Ferre wrote: >> Erwin, >> >> On 12/06/2012 12:32 PM, Erwin Rol : >>> Hello Nicolas, Havard, all, >>> >>> I have a very obscure problem with a at91sam9260 board (almost 1 to 1 >>> copy of the Atmel EK). >>> >>> The MACB seems to stall when I use large (>2 * MTU) UDP datagrams. The >>> test case is that a udp echo client (PC) sends datagrams with increasing >>> length to the AT91 until the max length of the UDP datagram is reached. >>> When there is no IP fragmentation everything is fine, but when the >>> datagrams are starting to get fragmented the AT91 will not reply >>> anymore. But as soon as some network traffic happens it goes on again, >>> and non of the data is lost. > > > >>> I tried several kernels including the test version from Nicolas that he >>> posted on LKML in October. They all show the same effect. >> >> [..] >> >> It seems that Matteo has the same behavior: check here: >> http://www.spinics.net/lists/netdev/msg218951.html > > I tried Matteo's patch and it seems to work. But I don't know if the > patch is really the right solution. I checked again with wireshark and > it really seems the sending that stalls not the receiving. But as soon > as a ethernet frame is received the sending "un-stalls". So maybe the > patch just causes an MACB IRQ at certain moments that causes the sending > to continue? Any digging is interesting for me. >> I am working on the macb driver right now, so I will try to reproduce >> and track this issue on my side. > > Any luck reproducing it ? Yes, I see unexpected things happening but as I am connected to a whole company network so maybe some broadcast packets are unlocking the interface... Anyway, I am continuing to investigate. Best regards,-- Nicolas Ferre