From: rogerq@ti.com (Roger Quadros) Date: Tue, 5 Feb 2013 13:32:19 +0200 Subject: [PATCH 00/13] Device tree support for OMAP HS USB Host In-Reply-To: <5110EC0D.40609@ti.com> References: <1359993540-20780-1-git-send-email-rogerq@ti.com> <5110EC0D.40609@ti.com> Message-ID: <5110EDC3.8040200@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 02/05/2013 01:25 PM, Rajendra Nayak wrote: > On Monday 04 February 2013 09:28 PM, Roger Quadros wrote: >> This patchset adds device tree support for OMAP's High Speed USB Host >> subsystem. Board adaptation for Panda and Beagleboard is also provided. >> >> Tested on Beagleboard. >> >> Will only work with Panda if we provide a reference to the PHY clock > > But there is no reference provided even for Beagle. Does it work because > the default clk speed is 192Mhz? On beagle board the PHY is connected differently, i.e. as the clock receptor. The PHY clock comes directly from the USB_CLK pin. On Panda the PHY is the clock provider to the USB_CLK pin. For that it needs a reference clock at the REFCLK pin which comes from FREF_CLK3. > >> generator in the device tree in PATCH 11. I do not know how to do that >> as there is no way to provide a phandle to any of the OMAP generated clocks >> in the device tree. Suggestions welcome:). > cheers, -roger