From: swarren@wwwdotorg.org (Stephen Warren) Date: Fri, 01 Mar 2013 13:07:20 -0700 Subject: [PATCH v4 3/8] ARM i.MX6q: Add GPU, VPU, IPU, and OpenVG resets to System Reset Controller (SRC) In-Reply-To: <51310A12.1040209@wwwdotorg.org> References: <1361878774-6382-1-git-send-email-p.zabel@pengutronix.de> <1361878774-6382-4-git-send-email-p.zabel@pengutronix.de> <51310A12.1040209@wwwdotorg.org> Message-ID: <51310A78.1020104@wwwdotorg.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 03/01/2013 01:05 PM, Stephen Warren wrote: > On 02/26/2013 04:39 AM, Philipp Zabel wrote: >> The SRC has auto-deasserting reset bits that control reset lines to >> the GPU, VPU, IPU, and OpenVG IP modules. This patch adds a reset >> controller that can be controlled by those devices using the >> reset controller API. > >> diff --git a/Documentation/devicetree/bindings/reset/fsl,imx-src.txt b/Documentation/devicetree/bindings/reset/fsl,imx-src.txt > >> +Specifying reset lines connected to IP modules >> +============================================== > ... >> +example: >> + >> + ipu1: ipu at 02400000 { >> + resets = <&src 2>; >> + }; >> + ipu2: ipu at 02800000 { >> + resets = <&src 4>; >> + }; > > reset-names is mandatory in the documentation and implementation; you > should probably add them to the example too. Oh, looking at the code further, I see reset-names is optional if the client node only has one reset defined. So ignore my comment above.