From: Felix Fietkau Date: Mon, 11 Mar 2013 21:17:44 +0100 Subject: [ath9k-devel] [PATCH] ath9k: Allow over-riding reg-domain. In-Reply-To: <513E35CD.3010006@candelatech.com> References: <1363020306-924-1-git-send-email-greearb@candelatech.com> <20130311190537.GB32171@tuxdriver.com> <513E35CD.3010006@candelatech.com> Message-ID: <513E3BE8.1000909@openwrt.org> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: ath9k-devel@lists.ath9k.org On 2013-03-11 8:51 PM, Ben Greear wrote: > On 03/11/2013 12:05 PM, John W. Linville wrote: >> On Mon, Mar 11, 2013 at 09:45:06AM -0700, greearb at candelatech.com wrote: >>> From: Ben Greear >>> >>> Otherwise, can't get the Sparklan AR9380 NICs to be >>> 5Ghz APs, since they are in world-roaming domain by >>> default. Add this to /etc/modprobe.d/ath9k.conf: >>> >>> options ath9k override_eeprom_regdomain=0 >>> >>> Signed-off-by: Ben Greear >> >> Why "=0" to enable it? Just to make it more confusing? > > You are just setting the country code...and country-code 0 seems > to at least open up the US regulatory domain so we use it > by default. > > You can use any country code you wish here. I'd like to have less fugly module parameter hackery please. How about either using CONFIG_CFG80211_CERTIFICATION_ONUS the way it was intended, or adding another config option that makes it bail out of ath_regd_init_wiphy() early, thus still processing the EEPROM regdomain hint and not making it binding. - Felix