From: jon-hunter@ti.com (Jon Hunter) Date: Thu, 14 Mar 2013 10:50:27 -0500 Subject: [PATCH 5/9] ARM: dts: Add GPMC node for OMAP2, OMAP4 and OMAP5 In-Reply-To: <5141F07E.3030501@ti.com> References: <1362763654-9660-1-git-send-email-jon-hunter@ti.com> <1362763654-9660-6-git-send-email-jon-hunter@ti.com> <513A5B23.5070302@ti.com> <513E1ADC.6030208@ti.com> <5141F07E.3030501@ti.com> Message-ID: <5141F1C3.6090009@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 03/14/2013 10:45 AM, Benoit Cousson wrote: > On 03/11/2013 06:56 PM, Jon Hunter wrote: >> >> On 03/09/2013 06:42 AM, Ezequiel Garcia wrote: >>> On Fri, Mar 8, 2013 at 10:25 PM, Javier Martinez Canillas >>> wrote: >>>> On Fri, Mar 8, 2013 at 10:41 PM, Jon Hunter wrote: >>>>> >>>>> Yes you are correct. In general, I have been trying to stay some-what >>>>> consistent with what hwmod was doing as this was being auto-generated by >>>>> some hardware design specs and I believe they wanted to eventually get >>>>> to the point where DT files would be auto-generated too for OMAP. >>>>> Furthermore my understanding is that the smallest page that can be >>>>> mapped by the kernel for ARM is 4kB. So if you declare it as 0x2d0 or >>>>> 0x1000 it will map a 4kB page (I could be wrong here). >>>>> >>>>> I don't have any strong feelings here but will do what the consensus >>>>> prefers. >>>>> >>>> >>>> Yes, you are right here. >>>> >>>> I forget that ioremap() does a page-aligned mapping and since the >>>> minimum page size for ARM is 4KB as you said, there is no difference >>>> between using 0x2d0 and 0x1000. Sorry for the noise. >>>> >>> >>> Certainly, I don't have strong feelings about this. >>> FWIW, mvebu maintainers imposes a "minimal" address space request >>> policy. >>> >>> On the other side, it seems to me we shouldn't look at internal kernel >>> implementation (i.e. ioremap page-alignment) to make this decision. >> >> I agree with that. I am not sure if Tony/Benoit have any comments on >> what they would like to do here to be consistent for the omap bindings. > > Yes, I full agree with that as well. The size should be purely HW > related. So we should not take any assumption about the page size / > alignment. Ok, what is best to use? The size from hwmod structures or the size from the documentation? Cheers Jon