From: nsekhar@ti.com (Sekhar Nori) Date: Mon, 25 Mar 2013 13:44:37 +0530 Subject: [PATCH v3 0/3] Platform support for EHRPWM & ECAP devices in DAVINCI. In-Reply-To: <1364197789-16783-1-git-send-email-avinashphilip@ti.com> References: <1364197789-16783-1-git-send-email-avinashphilip@ti.com> Message-ID: <5150076D.3080904@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 3/25/2013 1:19 PM, Philip Avinash wrote: > Add platform support for EHRPWM and ECAP by providing clock nodes and > device tree nodes. > This series depends on [1] and [2] and is available for testing at [3]. > Tested for back light support in da850 EVM with EHRPWM PWM device. > > [1] http://gitorious.org/linux-davinci/linux-davinci/trees/davinci-for-v3.9/dt-2 > [2] https://gitorious.org/linux-pwm/linux-pwm/trees/for-next > [3] https://github.com/avinashphilip/am335x_linux/tree/davinci-for-v3.9_soc_pwm > > Note: > DT support for EHRPWM backlight has not been added in da850-evm.dts as there is > conflicting pin-mux requirement with SPI flash. > > Philip Avinash (3): > ARM: davinci: clk framework support for enable/disable functionality Patch 1/3 did not reach me. I cant find it in archives either so most likely no one received it. Can you please send that one patch again? > arm: davinci: clock node support for ECAP & EHRPWM For future, please be consistent and capitalize 'ARM' in subject line. > ARM: davinci: da850: add EHRPWM & ECAP DT node > > arch/arm/boot/dts/da850.dtsi | 30 ++++++++++++++++++ > arch/arm/mach-davinci/clock.c | 21 ++++++++----- > arch/arm/mach-davinci/clock.h | 2 ++ > arch/arm/mach-davinci/da850.c | 46 ++++++++++++++++++++++++++++ > arch/arm/mach-davinci/da8xx-dt.c | 5 +++ > arch/arm/mach-davinci/include/mach/da8xx.h | 1 + > 6 files changed, 98 insertions(+), 7 deletions(-) > Thanks, Sekhar