From: nsekhar@ti.com (Sekhar Nori) Date: Tue, 2 Apr 2013 14:05:09 +0530 Subject: [PATCH v3 0/3] Platform support for EHRPWM & ECAP devices in DAVINCI. In-Reply-To: <1364197789-16783-1-git-send-email-avinashphilip@ti.com> References: <1364197789-16783-1-git-send-email-avinashphilip@ti.com> Message-ID: <515A983D.8040907@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 3/25/2013 1:19 PM, Philip Avinash wrote: > Add platform support for EHRPWM and ECAP by providing clock nodes and > device tree nodes. > This series depends on [1] and [2] and is available for testing at [3]. > Tested for back light support in da850 EVM with EHRPWM PWM device. > > [1] http://gitorious.org/linux-davinci/linux-davinci/trees/davinci-for-v3.9/dt-2 > [2] https://gitorious.org/linux-pwm/linux-pwm/trees/for-next > [3] https://github.com/avinashphilip/am335x_linux/tree/davinci-for-v3.9_soc_pwm > > Note: > DT support for EHRPWM backlight has not been added in da850-evm.dts as there is > conflicting pin-mux requirement with SPI flash. Can you check if this is really true even in newer boards (have a look at the latest schematics)? I remember this used to be a problem in very early versions but was fixed later. Thanks, Sekhar