Message-ID: <5164936A.8000005@xenomai.org> Date: Wed, 10 Apr 2013 00:17:14 +0200 From: Gilles Chanteperdrix MIME-Version: 1.0 References: <1362068715-3458-1-git-send-email-sr@denx.de> In-Reply-To: <1362068715-3458-1-git-send-email-sr@denx.de> Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit Subject: Re: [Xenomai] [PATCH] ipipe: MPC5200: Fix problem with external interrupts List-Id: Discussions about the Xenomai project List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: Philippe Gerum Cc: Stefan Roese , Xenomai On 02/28/2013 05:25 PM, Stefan Roese wrote: > The MPC5200 external interrupt are not working at all in the Linux > context with the current I-pipe support enabled. For example a > PCI firewire chip connected to an external interrupt doesn't generate > interrupts any more using the Linux FW drivers. With I-pipe > disabled or without the current I-pipe patch for the mpc52xx_pic.c > file, the external interrupts work just fine. > > This patch now introduces the xxx_mask_ack() function for these > external interrupts as already done for the other interrupts handled > in this driver. With this change, the interrupts work regardless > if I-pipe support is enabled or not. > > Additionally a small coding style issue has been included (spaces > around "-"). > > Signed-off-by: Stefan Roese > Cc: Philippe Gerum Philippe, has this patch been forgotten? I can't seem to find it in the core-next branch. -- Gilles.