From: stigge@antcom.de (Roland Stigge) Date: Thu, 25 Apr 2013 21:50:42 +0200 Subject: [PATCH 19/21] USB: lpc32xx: ISP1301 needs USB_PHY In-Reply-To: <1366910944-3033663-20-git-send-email-arnd@arndb.de> References: <1366910944-3033663-1-git-send-email-arnd@arndb.de> <1366910944-3033663-20-git-send-email-arnd@arndb.de> Message-ID: <51798912.4090108@antcom.de> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 25/04/13 19:29, Arnd Bergmann wrote: > The Kconfig entry for USB_LPC32XX unconditionally selects USB_ISP1301, > which is now only visible when USB_PHY is also enabled. > > This adds an appropriate dependency and enables USB_PHY in the msm > defconfig, avoiding these build errors: > > warning: (USB_LPC32XX) selects USB_ISP1301 which has unmet direct dependencies (USB_SUPPORT && USB_PHY && (USB || USB_GADGET) && I2C) > drivers/built-in.o: In function `usb_hcd_nxp_probe': > drivers/usb/host/ohci-nxp.c:224: undefined reference to `isp1301_get_client' > drivers/built-in.o: In function `lpc32xx_udc_probe': > drivers/usb/gadget/lpc32xx_udc.c:3071: undefined reference to `isp1301_get_client' > > Signed-off-by: Arnd Bergmann > Cc: linux-usb at vger.kernel.org > Cc: Greg Kroah-Hartman > Cc: Felipe Balbi > Cc: Roland Stigge Tested-by: Roland Stigge Acked-by: Roland Stigge > --- > arch/arm/configs/lpc32xx_defconfig | 1 + > drivers/usb/gadget/Kconfig | 1 + > 2 files changed, 2 insertions(+) > > diff --git a/arch/arm/configs/lpc32xx_defconfig b/arch/arm/configs/lpc32xx_defconfig > index 8fee514..398a367 100644 > --- a/arch/arm/configs/lpc32xx_defconfig > +++ b/arch/arm/configs/lpc32xx_defconfig > @@ -146,6 +146,7 @@ CONFIG_SND_DEBUG_VERBOSE=y > # CONFIG_SND_SPI is not set > CONFIG_SND_SOC=y > CONFIG_USB=y > +CONFIG_USB_PHY=y > CONFIG_USB_OHCI_HCD=y > CONFIG_USB_STORAGE=y > CONFIG_USB_GADGET=y > diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig > index a61d981..f85b427 100644 > --- a/drivers/usb/gadget/Kconfig > +++ b/drivers/usb/gadget/Kconfig > @@ -144,6 +144,7 @@ config USB_AT91 > config USB_LPC32XX > tristate "LPC32XX USB Peripheral Controller" > depends on ARCH_LPC32XX > + depends on USB_PHY > select USB_ISP1301 > select USB_OTG_UTILS > help