From: Sergei Shtylyov Date: Mon, 15 Jul 2013 21:54:02 +0000 Subject: Help with fitting unusual devices into IIO framework Message-Id: <51E46F7A.9020400@cogentembedded.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: Jonathan Cameron , linux-iio@vger.kernel.org Cc: linux-sh@vger.kernel.org Hello. Recently I have posted a driver for drivers/misc/ driving a pair of devices: Renesas R-Car Gyro-ADC and speed-pulse interfaces [1]. Arnd Bergmann, one of the maintainers told me that such driver would fit better into the IIO infrastructure. I have studied this infrastructure for some time and only found in it a place for the Gyro-ADC interface. Let me describe the devices to be driven in some detail. Gyro-ADC i/f is an interface to multichannel serial ADC (of 3 certain models) which can also calculate and average of each 8 samples and sum up 10 of these average values. Speed-pulse interface can count PWM-type input signal pulses and period between them. Though being two separate devices, these two have to be driven together because of the shared start/stop register (located in Gyro-ADC i/f still) and the clock with 1.25 ms period supplied from the Gyro-ADC i/f to the speed-pulse i/f; at the same time speed-pulse i/f generates interrupt with 100 ms period to be used by both interfaces. At this time, only speed-pulse interface support is required, Gyro-ADC can be largely ignored (though it has to be initialized). Perhaps we could add a new I/O channel type for speed-pulse i/f? What's your thoughts? [1] marc.info/?l=linux-kernel&m7367311823027 WBR, Sergei