From: swarren@wwwdotorg.org (Stephen Warren) Date: Tue, 10 Sep 2013 16:17:54 -0600 Subject: [PATCH v9 1/3] gpio: bcm281xx: Add GPIO driver In-Reply-To: <522F8BB0.6010301@broadcom.com> References: <1378836423-12467-1-git-send-email-markus.mayer@linaro.org> <1378836423-12467-2-git-send-email-markus.mayer@linaro.org> <522F7AE3.6050105@wwwdotorg.org> <522F8BB0.6010301@broadcom.com> Message-ID: <522F9A92.1040205@wwwdotorg.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 09/10/2013 03:14 PM, Christian Daudt wrote: > Hi Stephen, > On 13-09-10 01:02 PM, Stephen Warren wrote: >> On 09/10/2013 12:07 PM, Markus Mayer wrote: >>> From: Markus Mayer >>> >>> Add the GPIO driver for the Broadcom bcm281xx family of mobile SoCs. >>> These GPIO controllers may contain up to 8 banks where each bank >>> includes 32 pins that can be driven high or low and act as an edge >>> sensitive interrupt. >> The binding, >> Reviewed-by: Stephen Warren >> >> although ... >> >>> diff --git a/Documentation/devicetree/bindings/gpio/gpio-bcm-kona.txt >>> b/Documentation/devicetree/bindings/gpio/gpio-bcm-kona.txt >>> +This GPIO driver is used in the following Broadcom SoCs: >>> + BCM11130, BCM11140, BCM11351, BCM28145, BCM28155 >> Given that, I would expect the documentation of the compatible property >> to enumerate the compatible values for all of those different chips, >> although the driver could choose to only bind to e.g. brcm,bcm11351-gpio >> or brcm,kona-gpio, since they're all compatible with it. >> > How would this help ? All of these chips are part of the same family and > thus quite similar (the primary difference being on the memory > controller and packaging), and we can't know a priori on which > variations bugs will happen, if any. That's exactly why the DT should include a compatible value that precisely describes the chip; so that information is there if it's needed in the future.