From: "Michael G." Subject: Initio Corporation INI-1623 PCI SATA-II Controller Date: Sun, 29 Sep 2013 20:49:07 +0200 Message-ID: <52487623.3040102@tu-dortmund.de> Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: Received: from mx1.HRZ.Uni-Dortmund.DE ([129.217.128.51]:39520 "EHLO unimail.uni-dortmund.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756017Ab3I2Tj2 (ORCPT ); Sun, 29 Sep 2013 15:39:28 -0400 Received: from [192.168.22.101] (ip-95-222-25-101.unitymediagroup.de [95.222.25.101]) (authenticated bits=0) by unimail.uni-dortmund.de (8.14.7/8.14.6) with ESMTP id r8TIn7Ld002972 (version=TLSv1/SSLv3 cipher=DHE-RSA-CAMELLIA256-SHA bits=256 verify=NOT) for ; Sun, 29 Sep 2013 20:49:07 +0200 (CEST) Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: linux-ide@vger.kernel.org Dear ata-subsystem maintainer, I read that the ini162x driver is rather unsable and should not be used (found the kernel 3.11 commit). I have such a PCMCIA card and have been using it on a homeserver. I *did* have disk issues, but thought it was = due to heat=E2=80=A6 in only occured once or twice (on rather warm days) in= the last 1,5 years. The homeserver will be updgraded next year anyways and is anything but 'production use' - so do not take this eMail as a request to work on th= is driver :p Unless you want to have the hardware - I'd be willing to donate it and = send it via mail somewhere if needed :D Best wishes, Michael