From: Oliver Schinagl Date: Thu, 03 Oct 2013 23:15:00 +0200 Subject: [U-Boot] [RFC] ARM: U-boot and 2 GiB of ram with get_ram_size only being long Message-ID: <524DDE54.7090709@schinagl.nl> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hey all, I just yesterday received my CubieTruck (cubieboard3) with 2 GiB of Ram and added support for it to the sunxi-u-boot branch. While I know this isn't merged into the main u-boot tree (yet), I ran into the following problem. At the end of the dram init code, it is customary to call get_ram_size() and return its value. This is then used to print the DRAM size and also is passed to the Linux kernel. However the return size of get_ram_size() is a long. While I don't understand why not unsigned long or even u64 was chosen, this causes get_dram_size to overflow when having a ramsize of 2 GiB. While only printing of the value isn't hugely important, this does indicate u-boot seems to be somewhat artificially limited to 2 GiB of Ram? This only seems to affect the SPL as, if I understood correctly, there it stores the ram_size into the gd struct which I think is unsigned long. I've started working on a patch to convert common/memsize.c's get_ram_size(), to be completely unsigned long, however there seems to be quite a lot of code that calls this. So my question is now before going over all drivers and change that and submit a big patch-set, did I overlook anything and are my conclusions correct, get_ram_size should return unsigned long. Finally, a long is 32 bits on x86 and armv7, but how will that relate to 64bits armv8? As I understood, Windows treats long's as 4 bytes no matter if it's 32 bit or 64 bit. Linux is better and a long is 4 bytes on 32 bits, and 8 bytes on 64 bits versions. So how will u-boot work on armv8? Will the long datatype work well, or should I consider changing things more future proof? (u32 and u64 come to mind). Thank you for any input regarding that issue. Oliver