From: t-kristo@ti.com (Tero Kristo) Date: Wed, 9 Oct 2013 16:22:07 +0300 Subject: [PATCH 1/3] ARM: OMAP4: use CLK_SET_RATE_PARENT for dss_dss_clk In-Reply-To: <1381324359-28825-1-git-send-email-tomi.valkeinen@ti.com> References: <1381324359-28825-1-git-send-email-tomi.valkeinen@ti.com> Message-ID: <5255587F.5010601@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 10/09/2013 04:12 PM, Tomi Valkeinen wrote: > Set CLK_SET_RATE_PARENT flag for dss_dss_clk so that the DSS's fclk can > be configured without the need to get the parent of the fclk. I wouldn't touch this file right now, as we are trying to move the clock data over to DT. Legacy boot support probably requires to do this update, but I would rather wait a bit and do the modifications to both DT clock data and this file in the same patch. Same applies for other patches also. -Tero > > Signed-off-by: Tomi Valkeinen > --- > arch/arm/mach-omap2/cclock44xx_data.c | 3 ++- > 1 file changed, 2 insertions(+), 1 deletion(-) > > diff --git a/arch/arm/mach-omap2/cclock44xx_data.c b/arch/arm/mach-omap2/cclock44xx_data.c > index b237950..ec0dc0b 100644 > --- a/arch/arm/mach-omap2/cclock44xx_data.c > +++ b/arch/arm/mach-omap2/cclock44xx_data.c > @@ -830,7 +830,8 @@ DEFINE_CLK_GATE(dss_tv_clk, "extalt_clkin_ck", &extalt_clkin_ck, 0x0, > OMAP4430_CM_DSS_DSS_CLKCTRL, > OMAP4430_OPTFCLKEN_TV_CLK_SHIFT, 0x0, NULL); > > -DEFINE_CLK_GATE(dss_dss_clk, "dpll_per_m5x2_ck", &dpll_per_m5x2_ck, 0x0, > +DEFINE_CLK_GATE(dss_dss_clk, "dpll_per_m5x2_ck", &dpll_per_m5x2_ck, > + CLK_SET_RATE_PARENT, > OMAP4430_CM_DSS_DSS_CLKCTRL, OMAP4430_OPTFCLKEN_DSSCLK_SHIFT, > 0x0, NULL); > >