From: Chris Ruehl Date: Thu, 10 Oct 2013 12:29:31 +0800 Subject: [U-Boot] problems porting to 2013.x In-Reply-To: <5254F7E7.2010709@gtsys.com.hk> References: <5254EAF7.8080307@gtsys.com.hk> <5254F7E7.2010709@gtsys.com.hk> Message-ID: <52562D2B.3060307@gtsys.com.hk> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Wednesday, October 09, 2013 02:29 PM, Chris Ruehl wrote: > On Wednesday, October 09, 2013 01:34 PM, Chris Ruehl wrote: >> Hi. >> >> I hope someone can open my eyes on this. We try to port our MX27 board >> to the new u-boot loader using the SPL code rather then the self hacked >> NAND->SDRAM. >> >> I'm not able to get anything run. The console stays dead. >> >> Let start here: >> To see if the second image is booting I tried to load the image using >> TFTP and memcpy/memcmp it to the TEXT_BASE (0xa7800000) and go. The >> u-boot-v2 is loaded at 0xa7f00000. >> >> U-Boot 2.0.0-rc9-00188-geb5172d-dirty (Mar 24 2011 - 12:59:07) >> Board: MX27 >> NAND device: Manufacturer ID: 0xec, Chip ID: 0xf1 (Samsung NAND 128MiB >> 3,3V 8-bit) >> Scanning device for bad blocks >> Bad eraseblock 592 at 0x04a00000 >> dm9000 i/o: 0xd4000000, id: 0x90000a46 >> got MAC address from EEPROM: 00:00:00:00:00:00 >> Using environment in NAND Flash >> chip id: [2,882,1,01d] >> mpll: 398999390 Hz >> spll: 239999725 Hz >> arm: 265999593 Hz >> perclk1: 66499898 Hz >> perclk2: 66499898 Hz >> perclk3: 66499898 Hz >> perclk4: 66499898 Hz >> clkin26: 26000000 Hz >> ahb: 132999796 Hz >> ipg: 66499898 Hz >> Malloc space: 0xa6f00000 -> 0xa7f00000 (size 16 MB) >> Stack space : 0xa6ef8000 -> 0xa6f00000 (size 32 kB) >> running /env/bin/init... >> >> uboot:/ tftp u-boot.bin /dev/ram0 >> phy0: Link is up - 100/Full >> TFTP from server 10.128.2.105; our IP address is 10.128.2.10 >> Filename 'u-boot.bin'. >> Loading: ########################################## >> done >> Bytes transferred = 211308 (3396c hex) >> uboot:/ memcpy -s /dev/ram0 0 0xa7800000 211308 >> uboot:/ memcmp -s /dev/ram0 0 0xa7800000 211308 >> OK >> uboot:/ go 0xa7800000 >> ## Starting application at 0xA7800000 ... >> >> System.map >> a7800000 T __image_copy_start >> a7800000 T _start >> a7800020 t _undefined_instruction >> a7800024 t _software_interrupt >> a7800028 t _prefetch_abort >> a780002c t _data_abort >> a7800030 t _not_used >> a7800034 t _irq >> a7800038 t _fiq >> ... >> >> >> Any Idea? >> >> Chris >> > > More info: > I'd compiled the hello_world > make[1]: Entering directory > `/opt/cross_build/uboot.d/u-boot-git/examples/standalone' > arm-linux-gnueabihf-gcc -g -Os -ffunction-sections -fdata-sections > -fno-common -ffixed-r8 -msoft-float -D__KERNEL__ > -DCONFIG_SYS_TEXT_BASE=0xa7800000 -DCONFIG_SPL_TEXT_BASE=0xa7400000 > -DCONFIG_SPL_PAD_TO=5632 -I/opt/cross_build/uboot.d/u-boot-git/include > -fno-builtin -ffreestanding -nostdinc -isystem > /opt/armhf/gcc-linaro-arm-linux-gnueabihf-4.8-2013.07-1_linux/bin/../lib/gcc/arm-linux-gnueabihf/4.8.2/include > -pipe -DCONFIG_ARM -D__ARM__ -marm -mno-thumb-interwork > -mabi=aapcs-linux -march=armv5te -Wall -Wstrict-prototypes > -fno-stack-protector -Wno-format-nonliteral -Wno-format-security > -fstack-usage -fno-toplevel-reorder -o hello_world.o hello_world.c -c > arm-linux-gnueabihf-gcc -g -Os -ffunction-sections -fdata-sections > -fno-common -ffixed-r8 -msoft-float -D__KERNEL__ > -DCONFIG_SYS_TEXT_BASE=0xa7800000 -DCONFIG_SPL_TEXT_BASE=0xa7400000 > -DCONFIG_SPL_PAD_TO=5632 -I/opt/cross_build/uboot.d/u-boot-git/include > -fno-builtin -ffreestanding -nostdinc -isystem > /opt/armhf/gcc-linaro-arm-linux-gnueabihf-4.8-2013.07-1_linux/bin/../lib/gcc/arm-linux-gnueabihf/4.8.2/include > -pipe -DCONFIG_ARM -D__ARM__ -marm -mno-thumb-interwork > -mabi=aapcs-linux -march=armv5te -Wall -Wstrict-prototypes > -fno-stack-protector -Wno-format-nonliteral -Wno-format-security > -fstack-usage -fno-toplevel-reorder -o stubs.o stubs.c -c > arm-linux-gnueabihf-ld.bfd -r -o libstubs.o stubs.o > arm-linux-gnueabihf-ld.bfd -g -Ttext 0xa0000000 \ > -o hello_world -e hello_world hello_world.o libstubs.o \ > -L/opt/armhf/gcc-linaro-arm-linux-gnueabihf-4.8-2013.07-1_linux/bin/../lib/gcc/arm-linux-gnueabihf/4.8.2 > -lgcc > arm-linux-gnueabihf-objcopy -O srec hello_world hello_world.srec > 2>/dev/null > arm-linux-gnueabihf-objcopy -O binary hello_world hello_world.bin > 2>/dev/null > > > same, its not working > > uboot:/ tftp hello_world.bin > phy0: Link is up - 100/Full > TFTP from server 10.128.2.105; our IP address is 10.128.2.10 > Filename 'hello_world.bin'. > Loading: # > done > Bytes transferred = 590 (24e hex) > uboot:/ go hello_world.bin > memmap: Invalid argument > uboot:/ cp hello_world.bin /dev/ram0 > uboot:/ go /dev/ram0 > ## Starting application at 0xA0000000 ... > > > Thanks for any hint. > Chris Hi, while I study the nand_spl.c jump to the mxc_nand_spl.c the page count is calculated ( page = from / CONFIG_SYS_NAND_PAGE_SIZE ) where from is the CONFIG_SYS_NAND_U_BOOT_OFFS that means: #define CONFIG_SPL_PAD_TO 6144 /* must match CONFIG_SYS_NAND_PAGE_SIZE boundery */ #define CONFIG_SYS_NAND_U_BOOT_OFFS CONFIG_SPL_PAD_TO or some funny things happen to the u-boot.bin image in ram .. comments welcome. Chris