From: bcousson@baylibre.com (Benoit Cousson) Date: Tue, 22 Oct 2013 16:25:47 +0200 Subject: [PATCH] ARM: dts: am33xx, change usb ctrl module label In-Reply-To: <1381754961-3252-1-git-send-email-mpa@pengutronix.de> References: <1381754961-3252-1-git-send-email-mpa@pengutronix.de> Message-ID: <52668AEB.8000201@baylibre.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Markus, On 14/10/2013 14:49, Markus Pargmann wrote: > Control module is not usb specific. This patch changes the label to > usb_ctrl_mod. > > Signed-off-by: Markus Pargmann I've just applied it. Thanks, Benoit > --- > arch/arm/boot/dts/am33xx.dtsi | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) > > diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi > index f9c5da9..14510ee 100644 > --- a/arch/arm/boot/dts/am33xx.dtsi > +++ b/arch/arm/boot/dts/am33xx.dtsi > @@ -346,7 +346,7 @@ > ti,hwmods = "usb_otg_hs"; > status = "disabled"; > > - ctrl_mod: control at 44e10000 { > + usb_ctrl_mod: control at 44e10000 { > compatible = "ti,am335x-usb-ctrl-module"; > reg = <0x44e10620 0x10 > 0x44e10648 0x4>; > @@ -359,7 +359,7 @@ > reg = <0x47401300 0x100>; > reg-names = "phy"; > status = "disabled"; > - ti,ctrl_mod = <&ctrl_mod>; > + ti,ctrl_mod = <&usb_ctrl_mod>; > }; > > usb0: usb at 47401000 { > @@ -407,7 +407,7 @@ > reg = <0x47401b00 0x100>; > reg-names = "phy"; > status = "disabled"; > - ti,ctrl_mod = <&ctrl_mod>; > + ti,ctrl_mod = <&usb_ctrl_mod>; > }; > > usb1: usb at 47401800 { > -- Beno?t Cousson BayLibre Embedded Linux Technology Lab www.baylibre.com