From: "Binh Q. Pham" Subject: Re: Performance counters in kvm? Date: Thu, 14 Nov 2013 11:17:36 -0500 Message-ID: <5284F7A0.2060700@cs.rutgers.edu> References: <5283AE31.1000303@cs.rutgers.edu> <20131113175409.GA2088@redhat.com> <5284420E.8070403@cs.rutgers.edu> <20131114071616.GK2008@redhat.com> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="------------050501060909030508040406" Cc: kvm@vger.kernel.org To: Gleb Natapov Return-path: Received: from dragon.rutgers.edu ([128.6.4.3]:43587 "EHLO dragon.rutgers.edu" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755453Ab3KNQRn (ORCPT ); Thu, 14 Nov 2013 11:17:43 -0500 In-Reply-To: <20131114071616.GK2008@redhat.com> Sender: kvm-owner@vger.kernel.org List-ID: This is a multi-part message in MIME format. --------------050501060909030508040406 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit I am using: QEMU emulator version 1.5.0 (Debian 1.5.0+dfsg-3ubuntu5), Copyright (c) 2003-2008 Fabrice Bellard Attached files are output from cpuinfo and dmesg that you asked for. Thanks, Binh On 11/14/2013 02:16 AM, Gleb Natapov wrote: > On Wed, Nov 13, 2013 at 10:22:54PM -0500, Binh Q. Pham wrote: >> Hi Gleb, >> Thanks for the suggestion, but I just tried to specify the cpu type >> to QEMU: -cpu host and I got the same output. >> > Which QEMU version are you using, what is the output of "cat > /proc/cpuinfo" in the guest and attach guest's dmesg too. > >> Binh >> On 11/13/2013 12:54 PM, Gleb Natapov wrote: >>> On Wed, Nov 13, 2013 at 11:52:01AM -0500, Binh Q. Pham wrote: >>>> Hi all, >>>> >>>> I just started using kvm and want to use linux 'perf' tool inside >>>> the virtual machine to get some information about the hardware >>>> performance counters. I noticed in kvm source, there is pmu.c and >>>> pmu-stubs.c, so I assume they provide support for PMU. However, when >>>> I ran 'perf stat' in the VM, all hardware events are not supported. >>>> Sample screen shot: >>>> >>>> perf stat /bin/ls >>>> Performance counter stats for '/bin/ls': >>>> cycles >>>> stalled-cycles-frontend >>>> .... >>>> >>>> Could someone clarify for me if I can use 'perf' in VM with the >>>> current kvm state? >>>> >>> You need to specify host cpu type to QEMU: -cpu host. >>> >>> -- >>> Gleb. > -- > Gleb. --------------050501060909030508040406 Content-Type: text/plain; charset=UTF-8; name="cpuinfo.out" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="cpuinfo.out" processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 42 model name : Intel Xeon E312xx (Sandy Bridge) stepping : 1 cpu MHz : 3392.365 cache size : 4096 KB fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx rdtscp lm constant_tsc rep_good nopl pni pclmulqdq ssse3 cx16 sse4_1 sse4_2 popcnt aes hypervisor lahf_lm bogomips : 6784.73 clflush size : 64 cache_alignment : 64 address sizes : 40 bits physical, 48 bits virtual power management: --------------050501060909030508040406 Content-Type: text/plain; charset=UTF-8; name="dmesg.out" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="dmesg.out" [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.8.0-29-generic (buildd@panlong) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #42~precise1-Ubuntu SMP Wed Aug 14 16:19:23 UTC 2013 (Ubuntu 3.8.0-29.42~precise1-generic 3.8.13.5) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-29-generic root=UUID=12c55b5b-2807-4bd3-becd-87224f111bdf ro [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007fffdfff] usable [ 0.000000] BIOS-e820: [mem 0x000000007fffe000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Bochs Bochs, BIOS Bochs 01/01/2011 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x7fffe max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0080000000 mask FF80000000 uncachable [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [mem 0x000f1800-0x000f180f] mapped at [ffff8800000f1800] [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff] [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x7fffdfff] [ 0.000000] [mem 0x00000000-0x7fdfffff] page 2M [ 0.000000] [mem 0x7fe00000-0x7fffdfff] page 4k [ 0.000000] kernel direct mapping tables up to 0x7fffdfff @ [mem 0x1fffc000-0x1fffffff] [ 0.000000] RAMDISK: [mem 0x3615c000-0x370a5fff] [ 0.000000] ACPI: RSDP 00000000000f16a0 00014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 000000007fffe450 00034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 000000007fffff80 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 000000007fffe490 01137 (v01 BXPC BXDSDT 00000001 INTL 20100528) [ 0.000000] ACPI: FACS 000000007fffff40 00040 [ 0.000000] ACPI: SSDT 000000007ffff700 00838 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 000000007ffff610 00078 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 000000007ffff5d0 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007fffdfff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x7fffdfff] [ 0.000000] NODE_DATA [mem 0x7fff9000-0x7fffdfff] [ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007d600000-ffff88007f5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x7fffdfff] [ 0.000000] On node 0 totalpages: 524173 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3913 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 8128 pages used for memmap [ 0.000000] DMA32 zone: 512062 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0xb008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ5 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ10 used by override. [ 0.000000] ACPI: IRQ11 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] e820: [mem 0x80000000-0xfffbffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88007fc00000 s85056 r8192 d21440 u2097152 [ 0.000000] pcpu-alloc: s85056 r8192 d21440 u2097152 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 515975 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-29-generic root=UUID=12c55b5b-2807-4bd3-becd-87224f111bdf ro [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 2032316k/2097144k available (7170k kernel code, 452k absent, 64376k reserved, 6073k data, 1012k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=1. [ 0.000000] NR_IRQS:16640 nr_irqs:256 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 8388608 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3392.365 MHz processor [ 0.008436] Calibrating delay loop (skipped), value calculated using timer frequency.. 6784.73 BogoMIPS (lpj=13569460) [ 0.012490] pid_max: default: 32768 minimum: 301 [ 0.015584] Security Framework initialized [ 0.017357] AppArmor: AppArmor initialized [ 0.017425] Yama: becoming mindful. [ 0.022379] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.025732] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.027598] Mount-cache hash table entries: 256 [ 0.033751] Initializing cgroup subsys cpuacct [ 0.033904] Initializing cgroup subsys memory [ 0.034374] Initializing cgroup subsys devices [ 0.034459] Initializing cgroup subsys freezer [ 0.034570] Initializing cgroup subsys blkio [ 0.034637] Initializing cgroup subsys perf_event [ 0.034728] Initializing cgroup subsys hugetlb [ 0.036441] mce: CPU supports 10 MCE banks [ 0.037444] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.037444] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.037444] tlb_flushall_shift: 5 [ 0.238001] Freeing SMP alternatives: 24k freed [ 0.248119] ACPI: Core revision 20121018 [ 0.269009] ftrace: allocating 29358 entries in 115 pages [ 0.342114] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.382710] smpboot: CPU0: Intel Xeon E312xx (Sandy Bridge) (fam: 06, model: 2a, stepping: 01) [ 0.384000] Performance Events: unsupported p6 CPU model 42 no PMU driver, software events only. [ 0.394815] Brought up 1 CPUs [ 0.394919] smpboot: Total of 1 processors activated (6784.73 BogoMIPS) [ 0.398941] NMI watchdog: disabled (cpu0): hardware events not enabled [ 0.405694] devtmpfs: initialized [ 0.413603] EVM: security.selinux [ 0.413642] EVM: security.SMACK64 [ 0.413674] EVM: security.capability [ 0.423843] regulator-dummy: no parameters [ 0.425648] NET: Registered protocol family 16 [ 0.434542] ACPI: bus type pci registered [ 0.435823] PCI: Using configuration type 1 for base access [ 0.447772] bio: create slab at 0 [ 0.449675] ACPI: Added _OSI(Module Device) [ 0.449731] ACPI: Added _OSI(Processor Device) [ 0.449772] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.449812] ACPI: Added _OSI(Processor Aggregator Device) [ 0.454504] ACPI: EC: Look up EC in DSDT [ 0.482043] ACPI: Interpreter enabled [ 0.482120] ACPI: (supports S0 S3 S4 S5) [ 0.482683] ACPI: Using IOAPIC for interrupt routing [ 0.513621] ACPI: No dock devices found. [ 0.513752] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.515540] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.515631] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.524296] pci_root PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.525047] PCI host bridge to bus 0000:00 [ 0.525219] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.525364] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.525413] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.525466] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.525515] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff] [ 0.525976] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 [ 0.526955] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 [ 0.527153] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 [ 0.528990] pci 0000:00:01.1: reg 20: [io 0xc040-0xc04f] [ 0.529789] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 [ 0.530069] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI [ 0.530153] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB [ 0.530300] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000 [ 0.530999] pci 0000:00:02.0: reg 10: [mem 0xfc000000-0xfdffffff pref] [ 0.531654] pci 0000:00:02.0: reg 14: [mem 0xfebf0000-0xfebf0fff] [ 0.534845] pci 0000:00:02.0: reg 30: [mem 0xfebe0000-0xfebeffff pref] [ 0.534916] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000 [ 0.535574] pci 0000:00:03.0: reg 10: [mem 0xfeba0000-0xfebbffff] [ 0.536346] pci 0000:00:03.0: reg 14: [io 0xc000-0xc03f] [ 0.539493] pci 0000:00:03.0: reg 30: [mem 0xfebc0000-0xfebdffff pref] [ 0.541414] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM [ 0.541504] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.545202] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) [ 0.548133] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) [ 0.548634] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) [ 0.549120] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) [ 0.549400] ACPI: PCI Interrupt Link [LNKS] (IRQs *9) [ 0.552104] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.552189] vgaarb: loaded [ 0.552240] vgaarb: bridge control possible 0000:00:02.0 [ 0.554707] SCSI subsystem initialized [ 0.554808] ACPI: bus type scsi registered [ 0.555312] libata version 3.00 loaded. [ 0.555567] ACPI: bus type usb registered [ 0.556093] usbcore: registered new interface driver usbfs [ 0.556335] usbcore: registered new interface driver hub [ 0.556613] usbcore: registered new device driver usb [ 0.558066] PCI: Using ACPI for IRQ routing [ 0.558199] PCI: pci_cache_line_size set to 64 bytes [ 0.558516] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.558624] e820: reserve RAM buffer [mem 0x7fffe000-0x7fffffff] [ 0.562850] NetLabel: Initializing [ 0.562894] NetLabel: domain hash size = 128 [ 0.562932] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.563580] NetLabel: unlabeled traffic allowed by default [ 0.564280] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.564481] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.564612] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 0.569215] Switching to clocksource hpet [ 0.646466] AppArmor: AppArmor Filesystem Enabled [ 0.646967] pnp: PnP ACPI init [ 0.647122] ACPI: bus type pnp registered [ 0.648876] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.649241] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.649508] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.649899] pnp 00:03: [dma 2] [ 0.650046] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.650406] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.650767] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.652155] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.652879] pnp: PnP ACPI: found 7 devices [ 0.652951] ACPI: ACPI bus type pnp unregistered [ 0.678234] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.678267] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.678286] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.678303] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff] [ 0.678728] NET: Registered protocol family 2 [ 0.681716] TCP established hash table entries: 16384 (order: 6, 262144 bytes) [ 0.682223] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 0.682608] TCP: Hash tables configured (established 16384 bind 16384) [ 0.682881] TCP: reno registered [ 0.683039] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 0.683206] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 0.684675] NET: Registered protocol family 1 [ 0.684913] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 0.685161] pci 0000:00:01.0: PIIX3: Enabling Passive Release [ 0.685293] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 0.685393] pci 0000:00:02.0: Boot video device [ 0.685479] PCI: CLS 0 bytes, default 64 [ 0.688248] Trying to unpack rootfs image as initramfs... [ 1.679308] Freeing initrd memory: 15656k freed [ 1.693095] Initialise module verification [ 1.694099] audit: initializing netlink socket (disabled) [ 1.694642] type=2000 audit(1384445421.692:1): initialized [ 1.786602] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.800911] VFS: Disk quotas dquot_6.5.2 [ 1.801279] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.808520] fuse init (API version 7.20) [ 1.809359] msgmni has been set to 3999 [ 1.812626] Key type asymmetric registered [ 1.812707] Asymmetric key parser 'x509' registered [ 1.813081] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 1.813543] io scheduler noop registered [ 1.813618] io scheduler deadline registered (default) [ 1.813756] io scheduler cfq registered [ 1.815049] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.815797] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.816604] intel_idle: does not run on family 6 model 42 [ 1.817916] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.818361] ACPI: Power Button [PWRF] [ 1.835825] GHES: HEST is not enabled! [ 1.836936] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.859002] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.874586] Linux agpgart interface v0.103 [ 1.886900] brd: module loaded [ 1.892426] loop: module loaded [ 1.895123] ata_piix 0000:00:01.1: version 2.13 [ 1.897372] ata_piix 0000:00:01.1: setting latency timer to 64 [ 1.900649] scsi0 : ata_piix [ 1.901551] scsi1 : ata_piix [ 1.902011] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc040 irq 14 [ 1.902085] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc048 irq 15 [ 1.907388] libphy: Fixed MDIO Bus: probed [ 1.908239] tun: Universal TUN/TAP device driver, 1.6 [ 1.908287] tun: (C) 1999-2004 Max Krasnyansky [ 1.909121] PPP generic driver version 2.4.2 [ 1.909633] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.909705] ehci-pci: EHCI PCI platform driver [ 1.909871] ehci-platform: EHCI generic platform driver [ 1.909988] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.910192] uhci_hcd: USB Universal Host Controller Interface driver [ 1.911038] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 1.913056] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.913247] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.914459] mousedev: PS/2 mouse device common for all mice [ 1.916745] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 1.918073] rtc_cmos 00:00: RTC can wake from S4 [ 1.919476] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 [ 1.919869] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs [ 1.920751] device-mapper: uevent: version 1.0.3 [ 1.921419] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com [ 1.921848] cpuidle: using governor ladder [ 1.921936] cpuidle: using governor menu [ 1.922087] ledtrig-cpu: registered to indicate activity on CPUs [ 1.922141] EFI Variables Facility v0.08 2004-May-17 [ 1.928867] ashmem: initialized [ 1.930028] TCP: cubic registered [ 1.930859] NET: Registered protocol family 10 [ 1.934725] NET: Registered protocol family 17 [ 1.934992] Key type dns_resolver registered [ 1.937095] Loading module verification certificates [ 1.943491] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 38550890b1fce75cc801d8fb942703db919b9386' [ 1.943730] registered taskstats version 1 [ 2.054934] Key type trusted registered [ 2.065419] ata1.01: NODEV after polling detection [ 2.067843] ata2.01: NODEV after polling detection [ 2.068819] ata2.00: ATAPI: QEMU DVD-ROM, 1.5.0, max UDMA/100 [ 2.074810] ata1.00: ATA-7: QEMU HARDDISK, 1.5.0, max UDMA/100 [ 2.075195] ata1.00: 20971520 sectors, multi 16: LBA48 [ 2.076631] ata2.00: configured for MWDMA2 [ 2.084680] ata1.00: configured for MWDMA2 [ 2.093410] scsi 0:0:0:0: Direct-Access ATA QEMU HARDDISK 1.5. PQ: 0 ANSI: 5 [ 2.095924] sd 0:0:0:0: [sda] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB) [ 2.097607] sd 0:0:0:0: [sda] Write Protect is off [ 2.097675] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.098058] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.107120] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.109608] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 1.5. PQ: 0 ANSI: 5 [ 2.112475] sr0: scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray [ 2.112625] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.113566] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.119262] sda: sda1 sda2 < sda5 > [ 2.119833] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.132303] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.157968] Key type encrypted registered [ 2.212341] rtc_cmos 00:00: setting system clock to 2013-11-14 16:10:22 UTC (1384445422) [ 2.213767] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.213827] EDD information not available. [ 2.230836] Freeing unused kernel memory: 1012k freed [ 2.245628] Write protecting the kernel read-only data: 12288k [ 2.308449] Freeing unused kernel memory: 1012k freed [ 2.397793] Freeing unused kernel memory: 1008k freed [ 2.688585] tsc: Refined TSC clocksource calibration: 3392.303 MHz [ 2.688900] Switching to clocksource tsc [ 3.031115] udevd[93]: starting version 175 [ 5.421498] Disabling lock debugging due to kernel taint [ 5.554499] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 5.555973] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 5.739723] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 5.792451] e1000 0000:00:03.0: setting latency timer to 64 [ 6.267370] e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 52:54:00:12:34:56 [ 6.267598] e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection [ 7.170163] Floppy drive(s): fd0 is 1.44M [ 7.191924] FDC 0 is a S82078B [ 7.676279] EXT4-fs (sda1): INFO: recovery required on readonly filesystem [ 7.676456] EXT4-fs (sda1): write access will be enabled during recovery [ 7.868826] EXT4-fs (sda1): recovery complete [ 7.885820] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 10.182058] init: ureadahead main process (232) terminated with status 5 [ 13.110248] Adding 2095100k swap on /dev/sda5. Priority:-1 extents:1 across:2095100k [ 13.337297] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 16.382766] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 16.493638] udevd[344]: starting version 175 [ 19.542790] lp: driver loaded but no devices found [ 25.941739] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0xb100, revision 0 [ 26.433495] [drm] Initialized drm 1.1.0 20060810 [ 27.960715] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2 [ 28.620764] [TTM] Zone kernel: Available graphics memory: 1025514 kiB [ 28.620889] [TTM] Initializing pool allocator [ 28.621031] [TTM] Initializing DMA pool allocator [ 29.749847] type=1400 audit(1384445450.035:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=528 comm="apparmor_parser" [ 29.763995] type=1400 audit(1384445450.047:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=528 comm="apparmor_parser" [ 29.774061] type=1400 audit(1384445450.059:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=528 comm="apparmor_parser" [ 30.054775] [drm] fb mappable at 0x0 [ 30.054843] [drm] vram aper at 0x0 [ 30.054859] [drm] size 0 [ 30.054876] [drm] fb depth is 24 [ 30.054890] [drm] pitch is 3840 [ 30.655887] fbcon: cirrusdrmfb (fb0) is primary device [ 35.112700] Console: switching to colour frame buffer device 160x64 [ 35.131443] cirrus 0000:00:02.0: fb0: cirrusdrmfb frame buffer device [ 35.131562] cirrus 0000:00:02.0: registered panic notifier [ 38.161344] microcode: CPU0 sig=0x206a1, pf=0x1, revision=0x0 [ 38.455726] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 38.928480] [drm] Initialized cirrus 1.0.0 20110418 for 0000:00:02.0 on minor 0 [ 40.461321] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 40.463035] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 44.605492] parport_pc 00:04: reported by Plug and Play ACPI [ 44.606381] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 44.988867] lp0: using parport0 (interrupt-driven). [ 48.287563] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 48.604392] ppdev: user-space parallel port driver [ 50.828448] init: failsafe main process (545) killed by TERM signal [ 53.927979] type=1400 audit(1384445474.211:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=845 comm="apparmor_parser" [ 53.935706] type=1400 audit(1384445474.219:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=845 comm="apparmor_parser" [ 53.941989] type=1400 audit(1384445474.227:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=845 comm="apparmor_parser" [ 54.141417] type=1400 audit(1384445474.427:8): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=847 comm="apparmor_parser" --------------050501060909030508040406--