From: hector.palacios@digi.com (Hector Palacios) Date: Fri, 29 Nov 2013 17:46:44 +0100 Subject: [PATCH 0/3] serial: mxs-auart: flush_buffer hook and interrupt processing In-Reply-To: <201311291744.06943.marex@denx.de> References: <1385742927-11358-1-git-send-email-hector.palacios@digi.com> <201311291744.06943.marex@denx.de> Message-ID: <5298C4F4.1020507@digi.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 11/29/2013 05:44 PM, Marek Vasut wrote: > Hi Hector, > >> Hello, >> >> This series implement several fixes to the mxs-auart serial driver. >> >> The first patch implements the flush_buffer hook. Currently the driver >> can be shut down and pending data in the FIFO will be lost. >> >> The second patchs adds a check of the BUSY flag in the tx_empty hook >> to make sure the UART is not about to fill data into the FIFO. >> >> The third patch moves the interrupt handling from the ISR out to a >> tasklet. This was motivated due to different transmission problems >> with hardware and software flow control at high baudrates whereby >> transmission was interrupted or data lost. >> The problem can be reproduced by setting two AUARTs at 576000/N/8 >> with CRTSCTS and sending a large file from one port to the other >> with 'cat'. > > 57600 is not that high of a baudrate. Or do you really mean 576000 (576 > thousand) ? I wrote and meant 576000, indeed :-) Best regards, -- Hector Palacios