From: lokeshvutla@ti.com (Lokesh Vutla) Date: Thu, 12 Dec 2013 15:40:34 +0530 Subject: [PATCH] ARM: DRA7: hwmod: Fix boot crash with DEBUG_LL In-Reply-To: <1386841969-765-1-git-send-email-rnayak@ti.com> References: <1386841969-765-1-git-send-email-rnayak@ti.com> Message-ID: <52A98B9A.4080804@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Rajendra, On Thursday 12 December 2013 03:22 PM, Rajendra Nayak wrote: > With commit '7dedd34: ARM: OMAP2+: hwmod: Fix a crash in _setup_reset() with > DEBUG_LL' we moved from parsing cmdline to identify uart used for earlycon > to using the requsite hwmod CONFIG_DEBUG_OMAPxUARTy FLAGS. > > On DRA7 though, we seem to be missing this flag, and atleast on the DRA7 EVM > where we use uart1 for console, boot fails with DEBUG_LL enabled. > > Reported-by: Lokesh Vutla > Signed-off-by: Rajendra Nayak Tested on DRA7 evm using Tero's V10 clock series. Tested-by: Lokesh Vutla Thanks and regards, Lokesh > --- > arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c > index db32d53..18f333c 100644 > --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c > +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c > @@ -1637,7 +1637,7 @@ static struct omap_hwmod dra7xx_uart1_hwmod = { > .class = &dra7xx_uart_hwmod_class, > .clkdm_name = "l4per_clkdm", > .main_clk = "uart1_gfclk_mux", > - .flags = HWMOD_SWSUP_SIDLE_ACT, > + .flags = HWMOD_SWSUP_SIDLE_ACT | DEBUG_OMAP2UART1_FLAGS, > .prcm = { > .omap4 = { > .clkctrl_offs = DRA7XX_CM_L4PER_UART1_CLKCTRL_OFFSET, >