From: swarren@wwwdotorg.org (Stephen Warren) Date: Thu, 19 Dec 2013 10:24:13 -0700 Subject: [PATCH V2 2/2] ARM: tegra: add ams AS3722 device to Venice2 DT In-Reply-To: <52B2A01D.2000207@nvidia.com> References: <1387371179-16725-1-git-send-email-ldewangan@nvidia.com> <1387371179-16725-2-git-send-email-ldewangan@nvidia.com> <52B20BB4.50506@wwwdotorg.org> <52B2A01D.2000207@nvidia.com> Message-ID: <52B32BBD.8090404@wwwdotorg.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 12/19/2013 12:28 AM, Laxman Dewangan wrote: > On Thursday 19 December 2013 02:25 AM, Stephen Warren wrote: >> On 12/18/2013 05:52 AM, Laxman Dewangan wrote: >>> Add ams AS3722 entry for gpio/pincontrol and regulators >>> to venice2 DT. >> This patch still causes: >> >>> [ 0.726545] as3722-pinctrl as3722-pinctrl: pin gpio0 already >>> requested by as3722-pinctrl; cannot claim for as3722-regulator >>> [ 0.737681] as3722-pinctrl as3722-pinctrl: pin-0 >>> (as3722-regulator) status -22 >>> [ 0.744895] as3722-pinctrl as3722-pinctrl: could not request pin 0 >>> (gpio0) from group gpio0 on device as3722-pinctrl >>> [ 0.755500] as3722-regulator as3722-regulator: Error applying >>> setting, reverse things back > > This error is nothing related to the ams dt or driver. This came from > the framework from the driver/base for adding pinmux call before calling > any diver's probe. > Here is my finding: > Frameworks calls the pinctrl_bind_pins() before calls the driver's probe > (drivers/base/dd.c) and pinctrl_bind_pins() calls the pinmux mapping and > try to set the default (drvers/base/pinctrl.c). > > AMS AS3722 DT is flat type on which all sub devices of AS3722 have the > property on parent node only, there is no subnode for each sub driver > like palmas. In this case all sub drivers of_node is initialized as > parent->of_node in mfd-core.c (mfd_add_devices). > > mfd-core.c: mfd_add_device() > if (!pdev->dev.of_node) > pdev->dev.of_node = parent->of_node; > > So all sub devices of AS3722 has the parent node. > This node has the default pinmux configuration and so it tries to set > the default pinmux before sud-driver's probe get called. > The first one (for pinmux driver) it is success but for regulator and > rtc, it is failed as pins are owned by the pinmux drivers. Ah. I guess we should drop/revert 1c79a8b9f4a7 "mfd: Always assign of_node in mfd_add_device()" then. I guess I'll make the RTC core look at dev->of_node, or dev->parent->of_node to search for aliases. That should avoid the issue.