Content-Type: multipart/mixed; boundary="===============0779850538678492709==" MIME-Version: 1.0 From: Sree Harsha Totakura Subject: [Powertop] Idle power consumption of Intel e1000e kernel module Date: Sat, 21 Dec 2013 11:57:48 +0100 Message-ID: <52B5742C.90009@totakura.in> To: powertop@lists.01.org List-ID: --===============0779850538678492709== Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable Hi, On my ThinkPad T440s, PowerTOP-2.5 shows that the e1000e kernel module is drawing considerable amount of power when not it use (cable unplugged): > The battery reports a discharge rate of 5.86 W > The estimated remaining time is 5 hours, 11 minutes > = > Summary: 143.9 wakeups/second, 10.9 GPU ops/seconds, 0.0 VFS ops/sec and= 2.7% CPU use > = > Power est. Usage Events/s Category Description > 3.76 W 49.0% Device Display backlight > 1.46 W 0.0 pkts/s Device Network interface:= eth0 (e1000e) What I observed is that, if I remove the e1000e kernel module with `rmmod e1000e`, the corresponding entry in PowerTOP is gone, but the battery discharge rate stays the same. So, I am guessing there is either a hardware short-circuit somewhere on the motherboard or a bug in the underlying power management software or an estimation error. Any hints on how I can confirm/debug this? Thanks, Sree --===============0779850538678492709==--