From: Guenter Roeck Date: Tue, 18 Feb 2014 16:09:12 +0000 Subject: Re: [lm-sensors] [PATCH 1/3] hwmon: (lm90) Create optional attributes with sysfs_create_group Message-Id: <530385A8.7070903@roeck-us.net> List-Id: References: <1392513973-25148-1-git-send-email-linux@roeck-us.net> In-Reply-To: <1392513973-25148-1-git-send-email-linux@roeck-us.net> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org On 02/18/2014 08:07 AM, Jean Delvare wrote: > On Tue, 18 Feb 2014 07:41:16 -0800, Guenter Roeck wrote: >> On 02/18/2014 06:55 AM, Jean Delvare wrote: >>> Hi Guenter, >>> >>> On Sat, 15 Feb 2014 17:26:33 -0800, Guenter Roeck wrote: >>>> With the new hwmon API, all attributes have to be created as groups. >>>> Use sysfs_create_group and sysfs_remove_group instead of device_create_file >>>> and device_remove_file to prepare for the new API. >>>> >>>> Signed-off-by: Guenter Roeck >>>> --- >>>> drivers/hwmon/lm90.c | 27 ++++++++++++++++++++++----- >>>> 1 file changed, 22 insertions(+), 5 deletions(-) >>>> >>>> diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c >>>> index 701e952..c3bb771 100644 >>>> --- a/drivers/hwmon/lm90.c >>>> +++ b/drivers/hwmon/lm90.c >>>> @@ -1057,6 +1057,15 @@ static const struct attribute_group lm90_group = { >>>> .attrs = lm90_attributes, >>>> }; >>>> >>>> +static struct attribute *lm90_temp2_offset_attrs[] = { >>> >>> Other groups in this driver use the _attributes suffix, please do the >>> same for new groups for consistency. >>> >>>> + &sensor_dev_attr_temp2_offset.dev_attr.attr, >>>> + NULL >>>> +}; >>>> + >>>> +static const struct attribute_group lm90_temp2_offset_group = { >>>> + .attrs = lm90_temp2_offset_attrs, >>>> +}; >>>> + >>>> /* >>>> * Additional attributes for devices with emergency sensors >>>> */ >>>> @@ -1174,6 +1183,15 @@ static ssize_t set_pec(struct device *dev, struct device_attribute *dummy, >>>> >>>> static DEVICE_ATTR(pec, S_IWUSR | S_IRUGO, show_pec, set_pec); >>>> >>>> +static struct attribute *lm90_pec_attrs[] = { >>>> + &dev_attr_pec.attr, >>>> + NULL >>>> +}; >>>> + >>>> +static const struct attribute_group lm90_pec_group = { >>>> + .attrs = lm90_pec_attrs, >>>> +}; >>> >>> I am worried about this. Later in this patch set you'll move the "pec" >>> attribute from the i2c device to the hwmon class device. However this >>> attribute is very SMBus-specific, and has nothing to do with hwmon. I >>> don't think it makes sense to move this attribute, it should stay with >>> the i2c device. Non-hwmon i2c device drivers could implement it too. >> >> It is specifically mentioned in Documentation/hwmon/lm90, though. >> If I separate it to the i2c device, I'll have to come up with some text >> explaining where to find the attribute. Is that ok ? > > Well I don't even see the current wording as problematic, as it doesn't > say where to find the file and nobody complained. So you could leave > the text untouched, that would be equally fine with me. But if you want Fine with me. I'll leave it as is. Guenter _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors